Kubota B and BX series salvage yard

[skeeter1981]

I've found it. Thak you

 

[skeeter1981]

Can you also tell me what I need and how to run the hydraulics to the rear? I have the bucket with the grapple hydraulic pump on the front.

Again appreciate the help!

 

[hodge]

Daryl knows his stuff. He is a valuable resource for the Kubota community!

 

[skeeter1981]

hello Daryl! Would you mind assisting me in getting hydraulics to the back of my Kubota BX2370 in order to hook up a BT603 backhoe?


Thank you!

 

[North Idaho Wolfman]

hello Daryl! Would you mind assisting me in getting hydraulics to the back of my Kubota BX2370 in order to hook up a BT603 backhoe?


Thank you!

Your other thread on this has the answer.

 

[thatHoochguy]

Any BT600 backhoes laying around? Looking for control valve and or control valve parts.

 

[acronk]

Hi! Looking for a number of pieces! All for a B2400hsd.
1. Front left and right engine shroud
2. Seat
3. loader valve kit (U75000)
4. Hydraulic Outlet Kit (6C040-95100)

 

[skeets]

Hey you wouldnt happen to have the plastic thing that goes around the engine for a BX 2360 ?

 

[Dfbrown0911]

Would love it if you had a front guide/caster wheel off a RCK60 mower deck. Please let me know!! Thanks!

 

[jtripp01]

Hey Daryl- I am looking for the 10" front wheels for a B7100HST-D with the 6-bolt pattern. Any chance you have some?

 

[Prairie_Sentinel]

Hi, I'm looking for a mid PTO for a B2100 HSTD tractor. Thanks in advance.

 

[Mountainman]

Hi! Looking for a number of pieces! All for a B2400hsd.
1. Front left and right engine shroud
2. Seat
3. loader valve kit (U75000)
4. Hydraulic Outlet Kit (6C040-95100)

Id have the left and right side panels but no good seats or loader parts.

 

[Mountainman]

Hi, I'm looking for a mid PTO for a B2100 HSTD tractor. Thanks in advance.

I sent you a message

 

[Mountainman]

Hey Daryl- I am looking for the 10" front wheels for a B7100HST-D with the 6-bolt pattern. Any chance you have some?

Unfortunately i do not right now.

 

[Mountainman]

Hey you wouldnt happen to have the plastic thing that goes around the engine for a BX 2360 ?

Not right now i do not.

 

[Mountainman]

Any BT600 backhoes laying around? Looking for control valve and or control valve parts.

Unfortunately i do not have any bx backhoes right now

 

[Rjcoolman81]

Im looking for a front end loader for a b6100e does anyone know were i might find one fairly cheep

 

[Rjcoolman81]

Also looking for box blade and a drive line for bush hog for a b6100e

 

[Mountainman]

Im looking for a front end loader for a b6100e does anyone know were i might find one fairly cheep

Hard loader to find man. Unfortunately i don't have one right now

 

[Sdatrucking]

Hello. I have a small kubota B and BX series salvage yard in northeast Alabama. Below is a list of what I have right now. Shipping available on most parts. Please let me know how I can help. Thank you

B6100e
B6100d
B7100d
B7100hstd
B7100hste
B7200hste
B7200hstd
B5200e
B6200e
B8200ep
B8200hste-p
B8200dp
B8200hstd
B1550hste
B1750e
B1750hstd
B2100Hsd
B2400hsd
B7300hsd
B7800hsd
BX1800
Bx2200d
BX2230
Bx2350
Bx2360
Bx2370
Bx2670
Bx22
Bx24
F2400

Also check out the knowledge base on my website for lots of information regarding manuals, how-to's, compatibilties, and much more. It's a work in progress and continue to post as I can.

Https://Knowledge-base.mossycreekoutdoors.com
Thank you
Daryl
Mossy Creek Outdoors
Www.mossycreekoutdoors.com

B7100 4wd manual tranny front driveline appears to have a cover with a rubber boot that holds it in place my cover and boot are missing slowly getting tractor rebuilt also shaft that connects to drive shaft is very loose that comes out of front diff is there a bearing or bushing in the cone shaped piece do you have these parts thanks in advance