Kubota B and BX series salvage yard

[Mountainman]

B7100 4wd manual tranny front driveline appears to have a cover with a rubber boot that holds it in place my cover and boot are missing slowly getting tractor rebuilt also shaft that connects to drive shaft is very loose that comes out of front diff is there a bearing or bushing in the cone shaped piece do you have these parts thanks in advance

Im sure i have the tube but have to look about the bushing. No bearing in the cone just the joint that connects the driveshaft to the pinion shaft. If its the pinion shaft thats loose then yes there are bearings that hold it. Just remove those 3 bolts fr the cone and have a look. There shouldn't be any oil in there but most of the time there is from leaky seals on the shaft

 

[pgrovetom]

Hello. I have a small kubota B and BX series salvage yard in northeast Alabama. Below is a list of what I have right now. Shipping available on most parts. Please let me know how I can help. Thank you

B6100e
B6100d
B7100d
B7100hstd
B7100hste
B7200hste
B7200hstd
B5200e
B6200e
B8200ep
B8200hste-p
B8200dp
B8200hstd
B1550hste
B1750e
B1750hstd
B2100Hsd
B2400hsd
B7300hsd
B7800hsd
BX1800
Bx2200d
BX2230
Bx2350
Bx2360
Bx2370
Bx2670
Bx22
Bx24
F2400

Also check out the knowledge base on my website for lots of information regarding manuals, how-to's, compatibilties, and much more. It's a work in progress and continue to post as I can.

Https://Knowledge-base.mossycreekoutdoors.com
Thank you
Daryl
Mossy Creek Outdoors
Www.mossycreekoutdoors.com

You wouldn't know where I might get a 2008 BX25 dash as seen below

Hello. I have a small kubota B and BX series salvage yard in northeast Alabama. Below is a list of what I have right now. Shipping available on most parts. Please let me know how I can help. Thank you

B6100e
B6100d
B7100d
B7100hstd
B7100hste
B7200hste
B7200hstd
B5200e
B6200e
B8200ep
B8200hste-p
B8200dp
B8200hstd
B1550hste
B1750e
B1750hstd
B2100Hsd
B2400hsd
B7300hsd
B7800hsd
BX1800
Bx2200d
BX2230
Bx2350
Bx2360
Bx2370
Bx2670
Bx22
Bx24
F2400

Also check out the knowledge base on my website for lots of information regarding manuals, how-to's, compatibilties, and much more. It's a work in progress and continue to post as I can.

Https://Knowledge-base.mossycreekoutdoors.com
Thank you
Daryl
Mossy Creek Outdoors
Www.mossycreekoutdoors.com

I do have brackets for a b2400 but not for a b7100. I'll send you a message

You wouldn't know where I could get a 2008 BX25 K2771-99000 dash with Water temp and fuel gauges and RPM LCD display that looks like that below. The gauges are run on small stepper motors and the very tiny gears on the temp gauge gauge is stripped.

Messicks https://www.messicks.com/parts/kubota/K2771-99000#locator

Outside

Inside assemply

Schematic

Or have any idea where I might get one? I've scoured Kubota parts and non-official Kubota parts and nobody has one. My only hope is too find a used one from a junked 2008 BX25. I was told this gauge was used for only 3 years on the early BX25 and a few other models.

Tom