Kubota B and BX series salvage yard
- Thread starter Mountainman
- Start date
Do you still have the BX2370, and if so, how’s the hood on it? I would need the hinge assembly as well. Thanks!
I don't have any b7610 tractors but could have parts from others that cross over. What are you looking for?
I'm looking for the plastic lever guide on the right fender. Mines broken and it causes my bushhog to move up or down during operation. I also need the fuel level float. Thanks!
Uunfortunately I don't have either of those. But they are both available new on messicks. I'd be glad help with part numbers if you need them
Rhank you but I have the part numbers. I'll go ahead and order the fuel level float. I might just modify the broken plastic guide. I'm having a hard time wanting to spend $250+ on a piece of plastic. Lol.
I have a B2150 ( non hst ) and need a gear ( part number 67817-14320 ) and shift fork ( part number 67176-18130)
[MOD delete: No Phone numbers on Open forum, do it in a PM.]
thanks!
Last edited by a moderator:
Hi,
I have been looking for a ROPS for my B8200, specifically the type that the top unbolts from the main uprights. Assembly part number is 66418-72100.
Highlighted items numbers below are what I am focused on. My fingers are crossed that your B8200 has this setup. It is more common on a B2150.
Thanks,
Tim
I have been looking for a ROPS for my B8200, specifically the type that the top unbolts from the main uprights. Assembly part number is 66418-72100.
Highlighted items numbers below are what I am focused on. My fingers are crossed that your B8200 has this setup. It is more common on a B2150.
Thanks,
Tim
Unfortunately I do not. Both of those parts are specific to the b9200 and b2150 gear drive tractors and i don't have either. If I come across something I'll let you know
Unfortunately I do not. Both of those parts are specific to the b9200 and b2150 gear drive tractors and i don't have either. If I come across something I'll let you know
Unfortunately this one has the solid rops
Ju
Just read through the entire thread. Really appreciate seeing you helping people and putting forth the effort which so many others would never do. Live in north-central Alabama.
Hello, I'm looking for the following: 1012619 4-POINT SUB-FRAME MOUNTING KIT
for Backhoe Models BH70-X/BH75, BH80-X
on Kubota® Tractors B2710, B2910, B7800
I'm new to the message board world. Also sent in a PM before I realized this is how it's done.
I also read through this entire thread. It's great to know you're out there doing what you do!
for Backhoe Models BH70-X/BH75, BH80-X
on Kubota® Tractors B2710, B2910, B7800
I'm new to the message board world. Also sent in a PM before I realized this is how it's done.
I also read through this entire thread. It's great to know you're out there doing what you do!
Of couse. That's my main goal is to spread knowledge and help people whether I sell them parts or not. Where abouts in north central Alabama are you?Ju
Just read through the entire thread. Really appreciate seeing you helping people and putting forth the effort which so many others would never do. Live in north-central Alabama.
Yes sir. That's good be a very tough find used. I looked for a long time for one for my b2400 and never found a used one. Gave up and bought a b21. But ill certainly keep you in mind if I run across one
Thank you all. I'm probably going to bite the bullet and buy one new from woods at this point. They still make them with a 30 day lead time. Not cheap though, $2200 or so.
Good evening, wondering if you have a transmission case for a b9200hst diesel and how much? Thanks in advance