Do you have a complete d950 engine? Looking to upgrade my 6100e one day. What about a 6100e hood in nice shape?
Kubota B and BX series salvage yard
- Thread starter Mountainman
- Start date
I have a running d950 that runs good and has good power but does have some blowby. I don't have any nice hoods right now though
What does a 950 with some blowby run? Also which part of northeast alabama? I used to live in Oxford. I have a buddy that goes through Alabama pretty regularly...he's there now. I live in Texas though.
ok, ty for getting back to me. i rebuilt the hydro on mine, so far so good, parts for it were high dollar !. never owned , let alone worked on a tractor until i took this girl under my wings a couple yrs ago. it was so much fun splitting it..lol. the only real problem i ran into was the one large back steel plate ?, it was discontinued back then. sooo..with a little help from jb weld, some fine sanding, i was able to salvage the steel plate. if that one b2100 with the bad engine has a good hydrostat transmission ?, i wouldn't mind taking it off your hands for a good price ?.
That's awesome. They are great tractors. The problem is I just don't know if that Hydro is good or not and short of swapping it onto a tractor with a good engine there's no good way to know. I'm probably gonna just hang onto it as a spare and take my chances. On a side note the b7300 has the same hydro unit and sometimes you can find them cheaper as they were low hp and no power steering. Just food for thought
just rip it out, take it apart, you will know real quick like if its bad or not ?, the damage will stick out like a turd in a punch bowl..lol.
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
Good morning
I Updated the list with new tractors. Please let me know how I can help. Thank you
I Updated the list with new tractors. Please let me know how I can help. Thank you
Well I take that back. I do have that. It is the same as a b7100 which I do have.
Mountainman, I don't know if my post went through.
I am looking for the radiator "Bug and debris" screen that goes in front of the radiator of a B6100, B7100 radiator. DO you have one? If not , do you have one I could adapt? Thanks, Chris
I am looking for the radiator "Bug and debris" screen that goes in front of the radiator of a B6100, B7100 radiator. DO you have one? If not , do you have one I could adapt? Thanks, Chris
Jack
New member
Equipment
B8200 BF300 FEL, 4530 Backhoe, Kubota B7100 HST, Kubota G5200, Kubota B9200TLB
looking for a front rim for a B7100 believe 8" x 12" 4 bolt (old style Unit ) , also a short block for a d750?
I don't recall there ever being a 12" rim 8" wide in the 4 bolt pattern. There were some rare 10" 4 bolt in a wide but never seen a 12. The 2wd is a different bolt pattern but there were several wide rim's for that. The 4wd 7100 for a 12" rim is a skinny to run a 6-12 ag tire. I do have a good short block d750. It had low compression on 2 cylinders. I just removed the head the other day and cylinders looked good so may be able to hone it and put rings in it. I did have it running and it sounded good.