Paul Allwood
Well-known member
Lifetime Member
Equipment
Kubota B7200HSTD, RC60-72H MMM, homemade FEL, forks & ballast box, rotary hoe
While the cutter drum is off being balanced I made a start on the body of the mower. There's still a few things to be done to make the press easier to operate, but it works, and it's still faster, neater and stronger than welding.
4 x 90 degree bends done.
4 x 45 degree bends to go....tomorrow.
4 x 90 degree bends done.
4 x 45 degree bends to go....tomorrow.
Last edited:
