Bx2350 tick.

[New31127]

Cant seem to pin point it sound familiar to anyone? Have a video but dont know how to post it. The noise follows the speed of engine

 

[New31127]

Sounds metallic to me but I layed on ground and stood above engine and couldn’t pin point where I thought it was coming from I adjusted valves and exhaust on 3 would slide back and forth the rest would not so idk if that is normal

 

[North Idaho Wolfman]

Post the video on youtube then give us a link to see (hear) it.

 

[Jsjac]

Is it the baffles in the muffler?

 

[New31127]

Bx2350 tick

youtube.com

.

 

[New31127]

https://youtube.com/shorts/JBj2M341E4Q?si=_WkkEhl_1ImjXGsc. Second video of the one rocker arm that slides back and forth

 

[New31127]

Sorry guys I’m new here trying to post watching my 2year old and 9month old

 

[New31127]

Is it the baffles in the muffler?

Story on tractor was it needed a new motor radiator was leaking etc and it wouldn’t run at all I got it and found what smelled like gas in the tank I changed all filters oil etc and seen no metal in oil filter put some fresh fuel and atf in tank and I think it was gas in the tank why it wouldn’t crank but I got it going seems fine other then the tick I’ve never heard a d902 before so idk if it was normal or not

 

[GreensvilleJay]

Curious....WHY would you put ATF in the diesel fuel tank ??

 

[New31127]

Curious....WHY would you put ATF in the diesel fuel tank ??

Extra lubricity since the gas would had been extra harsh

 

[North Idaho Wolfman]

Do an adjustment per the WSM on all the valves

 

[New31127]

Do an adjustment per the WSM on all the valves

I did that changed nothing does it matter that rocker arm moves like that? None of the others do

 

[North Idaho Wolfman]

Yea that doesn't look or sound right.
Let me see if I can find anything on that.

 

[New31127]

If it has a rod knock I should be able to hear it just spinning motor over? Or no. Thought about pulling injection pump to check rollers and springs

 

[New31127]

I did the old mechanics trick a searched around with a piece of wood and it’s coming from cyl3 but noise is much louder on the head and not the crankcase itself Also did the injector lines and the one for cyl 3 gave off a different noise then 1 and 2 Should I pull injector and move it to different cylinder and try that and if not check injector pump

 

[Russell King]

If it has a rod knock I should be able to hear it just spinning motor over? Or no. Thought about pulling injection pump to check rollers and springs

I don’t think you would hear a rod knock under crank power. The starter is keeping it at a steady speed so nothing would be able to knock really.

 

[Russell King]

I did the old mechanics trick a searched around with a piece of wood and it’s coming from cyl3 but noise is much louder on the head and not the crankcase itself Also did the injector lines and the one for cyl 3 gave off a different noise then 1 and 2 Should I pull injector and move it to different cylinder and try that and if not check injector pump

Move the injector and see if the noise follows it.

 

[New31127]

Move the injector and see if the noise follows it.

Moved injector noise didn’t follow still sounds higher on engine near head idk how to rule out that the rocker arm is causing it

 

[Russell King]

Take valve cover off and adjust the torque of the rocker arm and then adjust (all?) the valve(s).