Cant seem to pin point it sound familiar to anyone? Have a video but dont know how to post it. The noise follows the speed of engine
Bx2350 tick.
- Thread starter New31127
- Start date
Sounds metallic to me but I layed on ground and stood above engine and couldn’t pin point where I thought it was coming from I adjusted valves and exhaust on 3 would slide back and forth the rest would not so idk if that is normal
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
https://youtube.com/shorts/JBj2M341E4Q?si=_WkkEhl_1ImjXGsc. Second video of the one rocker arm that slides back and forth
Story on tractor was it needed a new motor radiator was leaking etc and it wouldn’t run at all I got it and found what smelled like gas in the tank I changed all filters oil etc and seen no metal in oil filter put some fresh fuel and atf in tank and I think it was gas in the tank why it wouldn’t crank but I got it going seems fine other then the tick I’ve never heard a d902 before so idk if it was normal or not
GreensvilleJay
Well-known member
Equipment
BX23-S,57 A-C D-14,58 A-C D-14, 57 A-C D-14,tiller,cults,Millcreek 25G spreader,
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
I did that changed nothing does it matter that rocker arm moves like that? None of the others do
North Idaho Wolfman
Moderator
Staff member
Lifetime Member
Equipment
L3450DT-GST, Woods FEL, B7100 HSD, FEL, 60" SB, 743 Bobcat with V2203, and more
If it has a rod knock I should be able to hear it just spinning motor over? Or no. Thought about pulling injection pump to check rollers and springs