I have googled and searched but i just bought this tractor and can't get pto to come on.Any help would be nice
2010 Kubota 2800
- Thread starter racer86y
- Start date
I'm unclear on what you're asking. Do you need the location of the PTO lever or have you engaged the PTO and it doesn't work?
looks like it should be on the floor board on the right side (sitting in seat) of the transmission tunnel. Same location as it is on my L3200
I'm unfamiliar with your tractor. I've read enough on the web to learn the PTO is engaged via a cable. That would allow a relatively small lever to do the actual engagement. My PTO lever is on the right fender by the driver seat. Yours could be the same or nearly anywhere else including the dash. Mine has a yellow knob which may or may not help your hung. If you don't get what you need here you could try calling the dealer. They can probably find it in the parts manual. I have learned some users complain about the cable breaking. A possible solution is keeping it lubricated.
ken erickson
Well-known member
Equipment
B7100 hst, 2650 front mount snowblower, L2501 hst qa loader
I pulled this image from the web. With that being the case I am just guessing but I believe this to be a L2800 Gear drive. I pointed to what should be the PTO lever.
Sorry, Fordtech86 beat me to it!
Sorry, Fordtech86 beat me to it!
You can download an owner's manual here for free: https://www.kubotabooks.com/AutoInd...s/&AutoIndex=42dc52aa7b586c962edb948de061d81d