Search results

My yard is sloping uneven terrain with some banks of 40deg. I mow it with a rotary cutter and would never attempt to mow the banks with my Ford 2000. Mowing with HST is a dream imo and Id never want to do it again with a shifter. Backing the cutter up the bank is no problem. I have to be in L...

I’m going with once a year.

I used chains and binders once on my MX5100. It was solidly secure, but I didn’t like the paint chipping. Second trip I used 3” straps. The tractor didn’t move and there was no paint chipping. Ratchet straps were, quicker, easier and lighter. For me the only downside is spooling and securing...

First oil change after almost 1 year of ownership. She was delivered on May 25 2023. for 2.5 gal of Kubota oil and filter. I love this tractor!

New guard and prepared for the final battle. It came out of a hammer mill.

I would add that I have extreme stress tested the Homestead 55 grapple and it’s passed unscathed. The Veteran discount is 10% opposed to 5. Delivered to your door for less. The 55” is 300lbs. It’s way easier to use than my fork grapple. 2157.12 delivered to my house with the 10% discount.

A switch for a light bar would be nice. I’ve driven it down the road once after dark and the headlights seemed to only be decorative.

That switch is taped down with e tape.

Hi Kubota brothers, A few weeks ago I found this switch tucked under my loader control. I turned it on and off and it didn’t do anything, so I tracked it to this. What do you reckon it was for? I bought this machine used and the best I can tell is it was used for snow removal, because of the...

just like new!

I blame the dealership that I bought it from. I requested service before delivery and they at least hit the convenient zerks, but obviously ignored the missing and clogged zerk.

I cleaned one and cleared the grease tunnel, so it’s functioning properly. It was a ckskr to reinstall so I’ll assume it’s not to loose. Thanks all for the suggestion. At least $15 saved so far. On the second one I will try ez out. I can’t imagine it’s supposed to have a zerk thread diameter...

Thanks, I was able to find them and it’s $15 and $30. A dealer is close by, so I’ll try them first

I was greasing the loader today and discovered a missing zerk and one zerk didn’t take grease. I put in a new zerk and still wouldn’t take grease. I couldn’t get a zerk to grab in the other pin. The hole is too small, but I can’t tell if the previous one broke off. what do new pins cost...

Yes and I’ve looked at a few manufacturers, but haven’t found the right one yet.

Delivered on 4/1. Everything looks and operates as it should. I’d order from them again. I didn’t order lift gate service but that’s how it was delivered. I stuck my forks into the truck and he wasn’t having it.