Search results

I am looking for some help in identifying a Kubota L62HD front mount snowblower. It supposedly came from a Kubota L2550 tractor. It is being sold and I am having trouble getting useable photos out of the vendor. I can't find anything about the blower on the internet or what tractors it will fit...

I found a slightly used LED light bar and installed it on the rear of the cab on my B7800. I have a 6' V-Type snowblower on the 3 PTH and now I can see what is going on behind me.

I bought four LED's on sale at PA in the Spring and forgot about them. I was doing a wiring job and found them in the cabinet. So I installed them this week. What a difference in to the light output.

Well not really logging with my B7800, just moving a stump down the road from last years water and waste water installation. Had a stump left over in a yard down the road so I went with the Bota' and my shop made 3 PTH Boom Pole and brought it home. I don't know what the stump weighed but the...

Though some stupidity on my part for not securing the lower 3 PTH arms, I crumpled one of the Turnbuckle Stabilizers on my B7800. I did a real good job, bent the turnbuckle and bent both threaded ends. I have been trying to search for part numbers. The only number I can find at Messicks is...

Just had a problem pop up on my 06" B7800 HST. It sat unused for about 3 weeks and then yesterday I had some snow to push. The tractor was moving twice as fast in reverse than in forward. This is new as the speeds always matched. I took a quick look under the cab and the linkage might be a bit...

After two broken bell housings and two blown clutches I decided to fabricate side rail supports for my 06' Kubota B7800. I used 6" x ½" steel plate and connected the engine rails to the rear rails to support both the aluminum bell housing and the cab support structure. It was on the last clutch...

On my 06’ Kubota B7800 the float detent on the HUSCO hydraulic valve got damaged by ice in the cap that had no way to drain out. This is a known defect on these valves as rain and melting snow runs down the valve body and seeps into 4 gaps between the collar, spacers and cap. When I took off the...

I had a old set of rear chains on my B7800 , 12.4 x 16 R4's tires, but they tended to twist and were rough riding on hard surface roads. I found a Canadian supplier with free shipping and picked up a set of DuoGrip chains and installed them this week. Cost was $528 CAD, here is a link to their...

I have a 06' B7800 with a front blade. Last winter the cap that houses the float detent got water in it and froze and rusted. This year I took it apart and almost everything in there is rusted or broke. I ordered Detent, Regen Kit #7553665100 from my local dealer that they said was the correct...

. Had 22 cm (8 ½" for the metrically challenged) of snow yesterday, I am out with my B7800 and V-Type 6 foot snowblower. There are about 12 driveways I do. https://www.youtube.com/watch?v=n3sToRUI4wk .

. A couple of months ago my B7800 ignition switch was acting up. It would turn on, activate the glow plugs but not trigger the solenoid on the starter. Sometimes you could get the starter to work by wiggling the key. The tractor would start by crossing the positive terminal to the solenoid...

. I re-built a 7 foot, 3 PTH, Erskine V-Type Snowblower. Since I bought my B7800 last spring I have not had a use for my TEA-20 Ferguson so I gave it to my Son who lives West of me on a acreage. I have a 6 foot V-Type blower for the Kubota so last fall I set about looking for another one to...

. Tractor was running and I was trying to find a blown fuse suppling power to the cab fuse box. I was tracing wires and thought one of these two 30 amp fuses could be the problem. I pulled the pink one on the top of the photo and the engine quit running. I checked both fuses and they are OK. I...

. Bought this offshore, 6' 3 PTH blade from Peavey Mart. Regular price $650 CAD on sale for $450 CAD. For offshore the build and weld quality appears not bad. Only thing I found was the mounting holes for the angle brace that runs from the main beam up to near the top link were to large for the...

. Today I was out blowing snow with the B7800 and was returning home running in 2WD when the tractor made a grinding noise and coasted to a stop. I depressed the clutch which made a awful noise like a seized release bearing. I could not get it in any gear and had to tow it home. Hydraulics work...

I installed a rear wheel spacer kit on my B7800 today so I can use chains. It adds 1 ½" between the side of the tire and the sheet metal. Not complicated but took some time. Here is a video as that is easier than trying to upload photos on this site. https://www.youtube.com/watch?v=aIEOWDxnd2E .

. I have uploaded photos before, my albums are not full. The site won't let me upload photos. Just says "upload failed", anyone else ? .

What do tractor tire chain numbers mean ? Is there any way to tell what the width and length of the chains are from the chain number ? I am looking for used tire chains for the B7800 and have one set for sale but the owner has them in storage and can't get to them. She has a photo of the...

. To the Canucks on here. I have a new to me, 06' B7800 with 12.4 - 16 R4's on the rear. They are completely useless in the snow. which I always knew they would be. Looking for tire chains and the prices are all over the map. Does anyone know of a good (and cheap) supplier in Canada. .