Search results

Very unlikely you will get an answer, he was a 2 posts wonder, 7 years ago. :unsure: Might want to start your own thread on whatever your issue is. ;)

No apology needed, just giving you a ribbing. 😋

Are you getting fuel out of the top of the fuel filter bleeder?

If the price is right, the hours really don't matter.

It really helps when you quote a reply, if you follow it up with some typing. ;) :ROFLMAO:

With the top mount of the forks being round, you really need a round solid rod to distribute the load out better. But, you probably will never be able to get enough weight on the forks to cause you any issues.

That's kind of a really broad question. #1 It's a Kubota, so that's great #2 It's an M so if you want a bigger tractor there is that. #3 There is 6 different versions of the M4900 each has it's +'s and -'s #4 Being that is somewhere between 24 and 18 years old with only 128 hours is an anomaly!

Your not looking very hard. https://www.ebay.com/itm/388954236544

Buy the tubing (you can buy tubing with a thicker wall) and a bender, I did exactly that years ago. You can get whatever end you need to weld onto the tube.

Is theft that prominent where you live, that someone would stalk your movements, search a camper to steal a set of keys out of a camper? I could leave the keys on the dash of my truck with a big sign pointing to them and the truck would still be sitting there, with the keys on the dash days...

There were mutiple wiring variations on the B7800's. You more than likely have a variation that has 2 signals that feed the stop solenoid. One signal is the pull in signal that comes from the starter. The other signal is the hold signal which comes from the OPS controller. If you apply voltage...

What schematic are you looking at, All the copies i have are clear as can be.

Do not alter the valve, it won't do you any good. You can run the valve you have on the pump, but you risk blowing the seals out of the pump, as there is no pressure relief. Either get the right pump for the front, or get a new valve with a power beyond adapter and you will have to add a line to...

I've seen enough scary loads being hauled over the years. Some people believe if it fits it ships. I like leaving myself a larger than just marginal degree between hauling and crashing/dieing. All it takes is one little even to turn the tables really quick, and add mountains, curves and weather...

Do you have safety chains on it?

No you cannot legally drive on the road with a light bar on, they are listed as off road use only. Put a pair mounted low and pointed down for road use, that should keep you out of trouble. I'm a fan of mix of light bars and pods mounted in different locations. Also note: You can get LED's in...

If the pressure relief in the HST is malfunctioning it will cause this situation. Get the WSM and inspect the pressure relief valves, there are three.

Mike Tyson in all positions

Not Quite, The PTO on that model is a 2 speed PTO, the blue knob is a lockout to keep it from shifting into 1000 RPM without overriding it.

Most lines are just normal fuel line. Get some online or at a local auto parts store.