Search results

Thanks for that website, Wolfman! Sent from my Moto G (5) Plus using Tapatalk

My b2650 has a 3pt lowering speed valve located under the front of the seat. If it's fully tightened the 3pt won't lower. Turn CCW to increase lowering speed. I don't even know if you have one on the L175. Sent from my Moto G (5) Plus using Tapatalk

Those are 1 1/4" pins on the bucket mount? Sent from my Moto G (5) Plus using Tapatalk

The only thing that I know that doesn't let anything stick to it is Teflon. Teflon painting is a multistage process starting with sandblasting and finishing with baking on the final coat. I'm sure very expensive! Sent from my Moto G (5) Plus using Tapatalk

The inside faces of the thumb pivot mount at the bucket main pin are 6" apart - in answer to the other question about outside of bucket mounts. All my measurements are close but not precise, using a carpenter tape, and BH is still in storage so can't reposition. Sent from my Moto G (5) Plus...

6" long x 1" diam. pin for dipperstick thumb mount flanges, main bucket pivot 10" x 1" pin, actual thumb as per photo. Sent from my Moto G (5) Plus using Tapatalk

Re: B2650 Woodmaxx vs Woodland My new chipper just arrived this morning, within 4 days of the order. Let's get chipping! Sent from my Moto G (5) Plus using Tapatalk

23 3/4" between end of dipperstick and thumb mount flanges pins. 2 9/16" gap for thumb bar at mount flanges with 1" pin. Sent from my Moto G (5) Plus using Tapatalk

This is the thumb on my BH77 hoe, looks like what you need? I could send measurements if helpful. Sent from my Moto G (5) Plus using Tapatalk

Those are not grease points in my manual (BH77), but are threaded holes for zerks. No grease needed, but those pivot pins do move in use, just not much, maybe 10-20 degrees? Sent from my Moto G (5) Plus using Tapatalk

I'm going to check on mine, curious now. Some zerks are used on "non-moving" parts in that they lube areas that could seize parts together that need disassembly for service, like my snow blower augers to their shaft. Sent from my Moto G (5) Plus using Tapatalk

Re: B2650 Woodmaxx vs Woodland I'll be looking for a report on how it performs on your 2650, I may not be able to try mine until the weekend. Sent from my Moto G (5) Plus using Tapatalk

Re: B2650 Woodmaxx vs Woodland Nice! Mine is in Winnipeg already, shipped from Toronto area last Friday. I'm an hour drive east of Winnipeg. Any day now! Sent from my Moto G (5) Plus using Tapatalk

Re: B2650 Woodmaxx vs Woodland Just ordered a WC68. Could arrive next week. Sent from my Moto G (5) Plus using Tapatalk

First thing that came to mind is 3/4" pwf plywood, but your RS oak for sure if it's sitting around. Stuff will fall through expanded steel, no? Sent from my Moto G (5) Plus using Tapatalk

Ditto that. Sent from my Moto G (5) Plus using Tapatalk

Ok, except the weight for the FEL assembly with a 54" bucket is included in the 474 lbs, at least that's what my manual stated. "Include the mainframe, rigid bucket 54" and front guard." https://photos.app.goo.gl/NNQDNHTfGWvypAvq9 And ok, fluids and fuel and the BH bucket too, but 250 lbs for...

Let's see, from my manuals that came with the equipment, 1786 lb. B2650HSD tractor, 474 lb. LA534a loader with bucket, and from a Google search because their manual doesn't include its weight, 850 lb. BH77 backhoe. Equals 3110 lb. I bought a 18ft car hauler 7000 dual brakes, beaver tail is...

Lol Sent from my Moto G (5) Plus using Tapatalk

Can't you use it as a full business write-off? You need it to maintain your business driveway and work yard at home, like I do, as well as hauling it out to job sites. If you end up needing for personal use only tasks then the corporation could rent it to you at a great rate! I'm a sole...