Search results

B2400 does not have a compression release, I've noticed even when my B2400 has a new fresh battery it still sounds like it's struggling to turn over, maybe my starter is going, if so, I'll wait till it's dead, $285 for a new one My dynamo seized a few months ago, I had an alternator from a...

...since I've been around, kinda picked up another new toy. been spending most of my time getting this set up and ready for that" Hey, let's go" moment. been a lot of fun, and I'm tired of spending money, good lord there is a lot of crap you don't need for camping !!! anyway, I'm still...

do you have 220v power available to you in the area you will be using the welder ? I would suggest getting at minimum a 220v machine if you have the facilities, if you start making things, you'll inevitably " NEED MORE POWER !! " I have a Lincoln 115v mig, 115v was all I had available to me...

my flashers don't work. they did when I got the machine, my darling daughter (7) turned them on one day, and I have no idea how long they had been flashing before I found it ( it was dark and by this time they were flashing rather erratically ) I turned them off, and they haven't worked...

the "click" of the solenoid is a common problem, it's a wiring /resistance issue in the key switch and wiring harness, largely due to age and dirt. There is a fix for this issue, but it sounds like the starter itself is now having issues. The starter does not have a helix to toss the drive...

I'm not familiar with the controls on excavators or the L35. I did work at the CAT backhoe plant 10+ yrs ago, and they would configure the BH controls to what ever the customer wanted ( Ex control, JD, Case, ect....) One thing was that the control valves were largely plumbed the same, the...

I've been agonizing over a tiller for the last several months. Searched Craigslist just about daily, and all I'm finding are near new prices for worn out equipment ( kinda like I'm finding when looking for trailers ) AgriSupply has a 54" Caroni Tillavator, $1249, includes slip clutch. but...

you won't get around the $90 for the wheel stays ( the caster swivel and axle for the wheel ) My dealer did find that there is a different part number for the wheels and bushings, and they come as a kit. 70000-00607 $56.25(ea) thru Messicks website. I bought the wheels and the...

Well Vic, my Ear Wax conversion actually did pretty well, right up to the point I ran out, after asking a few folks at the mall if I could have theirs, I was escorted off the property..... seriously, in answer to the Op's question, heating fuel is closer to ( dirty)kerosine, YES...

I did the same when I found it, there are a few other places to check out, I'll feed those as needed oh, watch out for Eric, he's kinda..... umm, well, you'll figure it out

SHOW OFF ! :flipoff2: Welcome !

I think I have it fixed, well, I was at least able to use the trimmer for 15minutes and there is still string hangin' out the sides of the head. I bought a 50' roll of GATORLINE Magnum, .105" line with an Aramid fiber core this stuff WORKS !! I spooled it up and used the trimmer for the...

I have just over an acre to deal with, not all of it gets trimmed. the FS56RS-E is considered a "light commercial" tool FS90R has a little more powerful engine, but has the same head standard on it, and it's the "TapAction 2line AutoCut 25-2" head I'm having issue with. I bought as much...

... oh how I hate these things !! I've NEVER had one that was worth a damn !! if it isn't a problem with it running right ( old gas, just wanna be a PITA, what ever) it's the string head ! I bought a NEW Stihl FS 56 trimmer yesterday, runs wonderfully !! ( it should !!) but I've spent...

I have a 60" Cammond W/ 4 rip shanks, forward and back cutting edges. That I'm cutting clay makes anything a task, I just take it slow and easy, and she gets the job done. It is a little big but definitely workable. I do like that it wider than the track of the machine. also makes a...

A picture of the pump would be helpful. There are several models of compressors in the Black Max line, Sanborn was the original manufacturer, and they sold out to Coleman. If it is a twin cyl pump, likely it blew a headgasket, maybe a reed valve in the head. They are easy enough to...

I suggest checking these springs mentioned above before digging too deep, they do break from time to time, see this a lot on Moffetts with Kubota engines

I mow @ 2000 rpm with my B2400 with 60" MMM, but then I also don't let my grass get real tall over mowed height either. I mow once a week usually, and the heaviest grass is usually over the septic lines, and even then it doesn't usually bog down unless I try and rush thru it in high range. if...

I have to wonder if this may help you as well ? uber cheap, and easy to come up with the parts on your own if you have the resources.... http://www.orangetractortalks.com/forums/showpost.php?p=11440&postcount=7 I did this on my B2400 and haven't had an issue since. did all the other tricks...

Yes it can, it'll read 12v surface charge, and when load applied drop off to 3-4volts. I see it a lot in forklifts. especially electric pallet jacks. A bad/shorted cell will kill the whole battery and even draw down an attempt at jump start.