Search results

Great idea can you tell me how many square feet you used ? Thanks

Good Idea !!!!

Good idea !!

I fixed it by trading in the tractor. never found the problem drove me crazy

if you can the next time it acts up try taking off the gas cap and see if it clears up

When you check the oil level be mindful of what attachments you have on the machine and the position of the cylinders. If the level is ok with the cylinders extended it may be overfilled with the cylinders retracted if they are single acting

My LX330 just did its 3rd regen in 48 hrs , seems a little on the excessive side

You can all thank Biden supporters for this

The click is the fuel shut off opening. I would check the foot pedal position switch (Under the machine) I just traded in the same model and that switch loosened up and became out of adjustment. just so you know that switch is difficult to get to. If you pull off the rubber floor mat there...

I get the puffs of grey/white smoke but no noise

Thats exactly how i store my LX3310 and no issues

yup same situation here too

I have a LX3310 Mine was also a little stubborn starting when cold. try holding the key until the glow plug light turns off on its own. My machine has about 45 hrs on it and it seems to cold start faster now vs when it was new

I bought the same set up so far so good, the only negative when it decides to do a re-gen and the machine is not being used at full throttle

Thought about building one myself after i bought one and was lost in transit. Seller wound up sending another one. Anyway very nice build i like yours better than what i bought

Very Cool !!!!

I would look at the fuel solenoid, i think that the starter circuit also runs through it which is why there is no crank. also look at all the safety switches especially the on under the floor board that is connected to the forward/ reverse pedal

thats what said too

i know but no mid mount mower