Search results

I just went from a B2650 (which is basically the same as the LX2610) to the LX3310. For me there is a difference between the two machines with the more horsepower the 3310 is a little heavier which winds up being an advantage for me when I plow snow. If I find myself using the snow blower...

hide all the keys

What I've done in the past when I've had to repaint my hood is to bring the hood to the local paint distributor and they'll scan it and come up with a formula for automotive paint.. they can also do it in a single stage enamel or a two stage if you want any paint supplier can do this for you...

Wrestle it out while turning the front wheels right and left

the only thing I can think of is it was never locked when you put the drive shaft in

Start with the basics, check the bulbs then fuse's then the switch

5 minute fix very easy to install

I have always used turf tires and I have never had a problem. Actually 99% of the snow clearing I do is in two wheel drive

Bought theses last week big difference in lighting https://www.ebay.com/itm/165093964528?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649

Mobil 1 15 40 for me

Boot and hardware for RCK60-30 . purchased this year and used it twice. I traded in my B2650 for a LX3310 and assumed the mower decks would be the same. They are not even close. I have a little over $500.00 invested, I wound up buying this piece by piece because the dealer ordered a Boot...

I had a similar problem with my B2650. check the ignition switch if it's loose the switch could rotate and short out against anything metal behind the plastic cover. it's just a matter of repositioning the switch and tightening it if that's the problem good luck

kenwood . got everything from crutchfield

So all i was only able to find was battery power. in the left rear of the cab. seems to work ok since the sub woofer i added requires a connection to the audio receiver and won't turn on unless the the receiver is on. This was the project Removed the interior, and dynamatted the inside of...

Removed the interior, and dynamatted the inside of the cab, also added a new audio receiver , front speakers , sub woofer and new rear speakers

adding a sub woofer to the stereo

Should have mentioned my machine has a cab, looking for switched power inside the cab

Decided to do this to my lx3310. while it was all apart i'm adding a subwoofer and front speakers

Would anybody know where i can get battery power with the key on ? I Looked at the fuse block and there are only two open spots with no power thanks

I have the same machine, my first regen was at 18 hrs i know the machine needs to be in neutral with parking brake set then press the flashing light, the computer will control the throttle