Search results

I rarely use 4WD because I don't have hills, but when I am cutting the grass alongside the road I sometimes need to use it, but it tears the crap out of the ground if it is soft like it is right now from all the rains. Will it wear, Yep, but will it wear faster using it, Nope. Guess what...

Yesterday I started the install of the 3rd function and quick attach remote. Got the unit mounted, and somehow in the process of moving the fitting bracket for the loader from the inside, to the outside where the manual shows it, the bucket tilt seized up and tilt stopped functioning. I could...

Was going to say the exact same thing. Tire wear and front drive shaft binding will be the most notable wear items.

Sure, as long as you don't get motion sickness! It powered it fine, but the ram motions really move the tractor back and forth. If working flat ground, the B2410 can actually get the job done, but not something I would do a lot of, who knows what can get shook apart from all the motions.

Well, actually I did bale with it! :cool: Hooked it up to a NH 273 baler last year before I got the L4060. I don't have the correct hydraulic control on the B2410 or I would pull the MoCo as well.

Prices are going back up. Last week, $4.34, yesterday, $4.46. Today $4.69. This is WITH my discount card! I may wait until after the holiday weekend before filling my Transfer tank, but will probably need to put some in my F-450 to get to work on Thursday.

I talked to service today and he couldn't pull up anything specific for my Serial regarding the EGR, so said if it comes up again to call them right away, if not, whenever I can bring it in they can hook up a computer to it. One of these days I will get a large enough trailer to transport it...

I just got back from my Kubota dealer. The lowdown is to stay away from ones like Farm and Fleet branded fluids unless specifically for these HST. The plain label stuff, Don't use. The JD HST label is OK for UDT replacement, but NOT for UDT2 replacement, and they did confirm that Mystic JT5 is...

Oh, my 3rd Function/Quick Attach Remote finally came in, all 149 pounds of it and is sitting in front of my tool box for when I get the time to tear into it. I have a new to me 2019 F-450 to first do paint correction and PPF with Ceramic. Also have to remove and repaint the front bumper so it...

I tedded before raking and the grass was light and fluffy. The NH273 just ate it up and spit it out at 2 MPH. I got a feel for when the shear pin will snap and when I feel it start hitting hard I slow way down to less than a crawl so it ingests the grass. The bales are about average in size...

take away the taxes and diesel is same or less than gas. In the states there are federal, state and local taxes on top of the taxes for gasoline. Good example is between the state line of IL and WI, about a .50 per gallon difference. With my TSD card I get Diesel for $4.47 a gallon. When...

Put my L4060 HSTC to work this past week. In addition to my 4 acres, I got another 4 acres of established hay, and wow what a yield. nearly 200 bales from those 4 acres where I am lucky to get 70, if that from mine. Have a way to go. I ran out of light before I got the bales off the ground...

I found a Kubota Troubleshooting guide, and looks like that code is for a stuck EGR actuator valve. A key cycle clears it. So far got several hours on baling hay today afterwards with no more codes.. I did it's first regen at 56 hours the other day, maybe related or not, but seems to have...

OK, that makes sense then. Now other issue to deal with, just popped a code 7 hours after doing the maintenance. EGR system. Great and I have fields to get baled before noon tomorrow to avoid the rains.

While raking the fields I was just about to head over to my other field, looked down and had the engine light on and code P2413. Apparently it is the EGR system. Has anyone had to deal with this before? It on an L4060 HSTC.

Discovered that if you take the loader off the L4060 and it is uneven, it does NOT go back on! Trying to get it on it pushed forward making it even MORE uneven. I finally had to go get the B2410 out and lift and drag it onto even ground and THEN was able to get it hooked up. Eventful day...

Thats what I thought but the fuel lines coming from the separator didn't seem to line up, and one line appeared to run to a cooler in front of the radiator which made me think it was another hydraulic filter. I took the manuals out and put them, somewhere, the other day to check what needed to...

L4060, I thought I bought all the filters for it except the fuel bowl filter. What is the filter that is above the oil filter? It looks like a hydraulic filter, but find no mention of it in the 50 hour service.

Gotcha. Took 2 gallons to fill it up, in a pinch UDT works, but once I can get a couple pails of UDT2 from the local dealer, I will drain and refill it. It will get me through the next batch of hay though and thats what matters, at least not dead in the water. The supply chain woes suck...

Not too expensive, UNAVAILABLE! There is a difference! If a couple gallons of a very close fluid gets the tractor out of the shop until the correct stuff is available, then it isn't being cheap, its getting the job done. My B2410 has been using nothing but JD spec'd hydraulic fluid for 20...