Search results

I did bale with it once ... once. I do my hay fields with my L4060-HSTC-LE now. My B2410 is relegated to moving equipment around and backhoe work if needed, maybe some finish mowing. I need to troubleshoot the electrical system, the battery light glows at idle, either dynamo or the regulator.

This was my thought as well. I haven't dug into the schematics, but I believe the steering wheel doesn't actually connect to the steering gear, but via hydraulic pressure alone. Because I had my tedder behind me, it was sticking out past the center line so I had to ride close to the shoulder...

Kubota model numbers are simple really. First two numbers are the horsepower, the last two the model number. So a M6060 is a 60 HP 60 series M. An L4060 is a 40 HP L 60 series. M7060 is a 70 HP 60 series M. So based on the first two digits, you can shop based on HP. The letter designates...

Mowed 4 fields of about 15 acres, then tedded. Got another 11 hours on the tractor. Need to ted one more time, then rake and bale. Going to have a LOT of hay this cutting, Double what I got last year due to the drought. First 5 day stretch of dry weather we have had all spring.

I just picked up a couple fields for hay down the road, so normally I don't go anywhere on the highway other from one drive to the other, so this was my first time out at full speed pulling my mower and tedder. What I am concerned with is that I had to constantly steer left to fight the crown...

Now that I think about it, I might even have all the material for making one at home. I know I have a C channel, just need to see if it is wide enough, then put my plasma torch to work. OTOH I may still have my valve spring compressor, that might even work.

Yet the conversation continues that it is Kubota being blamed for it.

$95, or That will work, I have dozens of clamps to work with. :D

At this time, unfortunately we DO NOT make tools to fit FLAT FACE / SKIDSTEER couplings (ISO 16028). :(

How can I bleed off the pressure from these when attaching a grapple? Once I disconnect and come back to reconnect I cannot unless I crack a line and bleed off pressure. They are on my L4060 HSTC-LE with factory 3rd function. The grapple is a 10 bale hay grapple.

See here https://www.orangetractortalks.com/forums/threads/kubotas-dirty-little-secret.66846/post-688448 It is VERY easily explained. Simple answer, wrong equipment on the wrong machine.

I see that the most OBVIOUS reason here has been overlooked. The tractor bucket has wider flanges for a reason, that is because when you are in the seat trying to line up the bucket, you cannot SEE the bucket well enough to perfectly align it like you can in a SS. in a SS you are right there and...

I am not sure if this is an Alternator issue or regulator issue. Does it even have an alternator or is it a Generator, it is so tiny I can't tell. At idle my battery light glows, crank it up to 2500 and it goes out, or turn on the lights and it goes out, but lower throttle and it starts to...

From what I have read of KTAC is if the HST or engine blows up, it would be covered, during the span of the loan. Things like alternator or similar part would not, but the chances of repairs are so low that an extended warranty would be useless. Mine keeps popping an EGR code, but I keep...

P2413 popped up twice more since my last post. Both times I called and never got a call back for them to come look at it. First one I reset the PCM by disconnecting the battery. Second one I just ignored. Tractor is running fine without issues. I think my warranty is about up too.

So I get this email the other day from Kubota regarding my warranty for my L4060HSTC-LE. Has anyone bought the Orange Protection Plan and how does it differ from KTAC? Has anyone actually used it and was it worth it?

Well, I just found out last week that Verizon has upgraded their towers by me and I now have 5G UW and can get their internet service for $25-$35 a month for 2 or 3 years, unlimited. Considering that my current provider, Rise is constantly going down, and when not down is usually dropping...

The point is not that about running a cheaper oil (well maybe for some) the point is what can be used in a pinch when you need the tractor back in the field and the nearest dealer is out of stock, not looking to get any for a week or two, and all you need is a few quarts? That was my case last...

Well, Had it looked at, could not replicate, did a manual regen, played around a bit with it, and that was it. That was late November. I did all my hay work, baled 200+ bales, did a bunch of other work, no issues. Today, moving a couple pallets of fertilizer to the barn, just as I was finishing...

AND it's back, though with symptoms this time. After 93 hours it popped same code but this time smoke and chugging under 1200 RPM with load. I guess it's time to have it looked at under warranty. I was bringing in my Notill Drill on a pallet and saw smoke coming up from in front, and it...