Search results

Guys (and gals).... I am fixing to replace my front drive line due to wear and vibration issues. It appears I have to get to it from above by removing the floorboard. Am I correct and for those that have done it... how much of a job is this to replace in general. Butch

Guys.... how hard is it to replace the front drive line in a 2410? I have looked at it and it seems like it has to be approached from underneath the floorboard. Any and all advice is welcome on this one as it will be my fall project for sure. Butch PS.... My wife tells her friends I bleed...

My granmaw taught me to never throw anything out that smelled good and tasted decent.... sooooooo.... I just finished the primary fermentation of the spple jack I am concocting. It has been two weeks since the fermenter was sealed up and the bubbler vent put in place. When I popped the lid I...

I want to throw this out to the folks at OTT... during the last big snow we had here in Maryland I got my B2410 4 WD HSD hung up a couple of times. I rocked myself pretty hard to get free in both cases;however, now when traveling at high speeds in high gear only I have a distinct vibration...

We are all into maintaining our "Orange Iron" and we do draw from a well of knowledge on this site:D. This may not be the place for this :rolleyes:but I have found it has helps keep my blood pressure in check when wrestling with an ill Kubota and it DOES take the edge off on the cheap. Here it...

There are just some things that are not covered in a WSM or operator's manual that we stumble upon that make good sense in prolonging the life of our tractors. Now there may already be a thread that I have not uncovered yet that covers this.... so if there is please feel free to redirect me...

This is worth a new thread... The Husco valve that has been giving me fits is fixed....once and for all. We x-rayed the monoblock stripped down to just the block.... no cracks, broken pieces, or blocked internal honey comb. So we took the spool and chucked it in a lathe and analyzed its...

Seeing as there is not much info out there on the Husco control valve that Kubota used extensively on their equipment I thought it may be a good idea to post this link to the Husco International site. The link has the shop drawings of the monoblock 9210 valve Kubota used. Hope someone may find...

Hey all.... It was suggested I disassemble and clean the relief cartridge on the Kubota B2410/Husco 9210-B1A D02 FEL control valve... Here are the results and a recap of what it is doing.:confused: Tom… I disassembled the relief valve on the Husco as suggested. No obstruction or debris was...

I have been told I cannot get a main relief cartridge for my Husco Hydraulic Control Valve on my B2410 4WD HSD front blade. It appears you have to replace the complete control valve. I even talked to Husco tech support who reluctantly told me the Kubota Husco control valves were proprietary and...

Cabin fever has set in... for sure! And this gives me too much time to think. I have a loader control valve (the original OEM) that after I got the connection lines wrong only once and tried to move the bucket seems to have damaged the valve. Here is what it does... the valve works perfectly...

Guys (and Gals), I have a 2001 Kubota B2410 4WD with Bispeed turn (?). Recently on compact tractor site looking fror the skinny on the best way to replace the metal hydraulic pressure line that runs from the pump the full length of the tractor to the 3 pt hitch I ran across some horror stories...

I have a 2410 HSD 4 wheel drive that I bought new and it currently has 854 hours on it. I take very good care of "Bubba" and perform routine maintenance on or before the scheduled services. My tractor looks a good as new.... Here's the issue. The power steerring is jerky after the tractor has...