Search results

Folks, I don't know where this actually fits so I will start here. My B2410 has two 1015 incandescent bulbs for head lights. They were ok but I wanted more lumens than they would produce so I looked into LED lighting replacement bulbs. I found a site called www.superbrightleds.com that pointed...

Guys this is post worthy because the fix took a left turn at Albuquerque. On my B2410 I had a 10 A. fuse that would blow occasionally. Thought I had a short. Checked all wiring and switches and everything was fine. After a couple of weeks the fuse blew again.... it is on the head light, dash...

First of all..... Please enjoy 2017... pick the good stuff and go for it! About a two months ago I blew the 10A fuse on my B2410 that goes to the lights and gauges. Did not think much of it... just replaced it and went on.... till a couple of days ago. That is when I noticed the charge...

Folks... mowing with the B2410 and the belly mower. 1800 hours on the clock. here is the deal... I was mowing and all the sudden I think I heard a loud metallic sound when the whole shooting match shut down. I took everything out of gear and went to start it back up. NOTHING HAPPENED! I...

Has anyone replaced the brake in their B2410? How hard is it and what does this encompass as far as teardown to get to it? Thanks all! Butch PS... I have a very well equipped shop and can do pretty much any thing in it...

Guys... for some reason the right rear oil seal popped out and obviously I lost my hydraulic oil... what can cause the seals out... Need answers parts shop tomorrow..

Guys.... I have my 4wd B2410 (No Biturn). My front turf tires (Originals) are worn down past the tread on the outside edges on both sides left and right. Cord not showing yet though. The inside tread is great. The rest of the tire(s) are fine... plenty of tread. I checked alignment just like...

I know there is a thread in here some where... I can't seem to find it. As most of you know Firestone discontinued the 21x8.00-10NHS turf tire.:mad: With this being a 4 wheel drive I have to find the same size tire. Ok guys and gals... point me in the right direction... oh yes... I use the...

I think I initially posted this in the wrong place:o ... so here we go once again.... OK All.... her is the 64 thousand dollar question.... Does anyone have any recommendation for preventive maintenance on the Kubota mid mount mower gear boxes other than just checking the oil level every 10...

John Henry picked up a 15 gallon poly tank sprayer with a 14 GPM demand pump. That was it... so we set out one to make it portable, configured for a spray bar and direct adjustable wand. So we set out to scrounge and bogart "things" to make this happen. The neighbor gave us a three point...

Well... grabbed John Henry's end loader and strung up the mower deck like a hog being butchered... Power washed everything and proceeded to tear it down to see how bad was bad... A several neighbors dropped by the shop to witness the carnage. I finally got the gear box off and with the help of...

When things go south they go way south.:eek: I lost the gear box on the RC 60. Sounded like glass in a blender even over the tractor's engine. I pulled the deck and guys.... I can turn the drive shaft and the belt pulley does not budge.... I can hear metal on metal when I turn the input shaft to...

While doing some maintenance on the B2410 I found something.:D I was dressing up the bundled wiring behind the right tail light I found a #10 hot wire and a #10 ground terminated with a ring terminal. This is hot when the ignition is turned. I am going to put a switch in line and run a...

Vic... how do I access the serviceable grease fitting on the clutch throw-out bearing ? I have never serviced it:( Thanks in advance! Butch:)

Long time in limbo... glad to be back! Here is my question(s). has anyone split a B2410 HSD for what ever reason? I have 1540 hours on my machine and I thing I am beginning to pick up a throw out bearing noise. In anticipation for bearing replacement I have a couple of questions. 1. Is there...

I have a B2410 with a RCK60-24B MMM. I added a Kubota grass bagger that incorporated a drive shaft PTO to the blower. The PTO is powered by bolting it to the shute side mower deck pulley. Here is the problem... when you mount the blower PTO to the top of the pulley it completely covers the...

Can anyone tell me what the diesel fuel tank capacity is on a G 1800 lawn mower? Thanks in advance, Butch.

It's the fourth quarter and 10 seconds to go... Guys I am going to install my new front drive universals on my B2410. Here is the sixty four dollar question... How the ^&$@# do you get to the roll pins on the universal on the transmission side of the front drive line? I pealed back the floor...

Hey all! I just noticed a drip of oil under the right side front axle on my tractor. It is coming from the lower side of the axle pivot joint. How hard is it to tear down, reseal, and reassemble the affected side? I have a WSM but is there something else I may need to know before tearing into...

Ok Guys.... here it is. I am going to replace the front drive line universals on my B2410 before the snow. I have the WSM and it is not clear as to the most efficient way of removing the universal yoke off the transmission. Based on my observations (after O-Beer:30:D) it looks as if I will have...