Search results

This is probably a dumb question but here it goes anyway. It appears there is no clutch on the B2601 or its big brother B2650. The duel brake peddle is under the left foot where the I would expect a clutch (like on my B2410} to be. My question is, "How are the mid PTO and the travel levers...

Has anyone experienced this issue? I have an RCK60-24B MMM and when I was removing it from the ole B2410 to set it up for winter I noticed the ring you pull back to slide the drive shaft on the MPTO had be ever so slightly touching the transmission housing. Not much mind you but I know that...

I changed all the fluids in the B2410. Replaced the mid PTO seal along with one axle seal... no more seeps!:D This is where I need some opinions. I also replaced the engine coolant with Valvoline Zerex g-05. as recommended for diesels. Instead of using the 50/50 method I went with 70/30...

Folks... I am retrofitting the B2410 with a Racor fuel/water separator/30 micron filter... I send pics as soon as I am finished and explain why I went the Racor route. As part of the retro I siphoned the fuel from the fuel tank through a cotton cloth. It did not collect any particulate solids...

Guys... this is for my neighbor. I watched as his 2015 BX2370 with his RCK60B-23BX (577 hours) get hauled off to the dealer for the second time for the same issue. all within 6 months time. The drive pulley off of the gear box came loose making for huge vibrations, belt wear and the idler...

My buddy has a B2410 like mine. He recently ran the tractor with the brake peddles in a down and semi locked position for what he estimates was 1/4 mile. He said when he dismounted the tractor he could smell HOT hydraulic oil big time. He says it still runs and operates the same as before the...

Folks... am I imagining something that is not there or is it a real thing? I have owned my tractor for 20 years. I have 2650 hours in the seat running MMM, FEL and a front snow hydraulic dozer blade. At almost 70 yo and still in good health the "feel" from the seat of operating the units over...

OK guys... I just had a come to Jesus meeting regarding lawn tractor hydrostatic drives. My buddy gave me a John Deere LX 178. The gears in the tranny were toast. After much research I learned hydrostatic drives for MANY makes of tractors (JD, Toro, Wheel Horse, Cub Cadette, Poulan and many...

Let me just say up front... I warned her. My next door neighbor of 30+ years decided to get her husband something really nice ( $$$$ ) for Father's Day. Knowing he likes a really nice manicured lawn ..... and he'd been talking about getting a new mower and giving his current one to his son...

I am doing some preventative maintenance on the "Old Gal". I have some slop in the blade (same as a loader) control valve linkage and I cannot find any parts break out online. The model number is B2056 and the serial number is 10843. Here is the question... is there a wear bushing in the...

Happy Thanksgiving all! I want to give a major Thanksgiving shout out to this site. Kudos to the site admin and all contributors that make this encyclopedia library available to all of us that inquire of our orange tractors. May God bless us all!

Folks... this is a dumb question but I have learned a question not asked is an invitation to an "all CRAP" moment. I have a 2000 vintage B2410 tractor with about 2300 plus hours on her. It is in excellent shape... I keep up with maintenance and repairs. Here is the issue... sounds simple but I...

A lot of folks asked me to post what I did to replace our B2410 original seat... As I got older it beat the living crap out of my spine. I replaced it with a MICHIGAN BLACK SEAT, MILSCO V5300 HIGH BACK SUSPENSION SEAT W/LUMBAR from seat warehouse for $359.00 shipping included. Seat warehouse...

Long story short.... my perfectly good B2410 stock seat is not doing my back and legs any favors these days. I am looking for some advice.... I have been checking out the MILSCO V5300 mechanical seat for replacement from Seat-Warehouse.com ... It is a little pricey however I am going to have to...

May God Bless us all... differences, discussion, pontification, and reason will bring us together. Make no mistake about it America is still great and we will figure it out and move on.

I believe I have justified the cost of a dash cam. This morning I was crossing the Susquehanna River on I-95 in Maryland. Typical morning bumper to bumper commuter traffic plus the holiday early bird travelers. Did I mention it was moving along at 75 MPH. I was in the slow lane when I saw a...

Folks... anyone that has operated a tractor any length of time knows operations can go south in a blink of an eye. When you read it or hear it... our first thought is, "I am really careful and it won't happen to me". Well... I am living proof a tractor is ONLY functional IF it is up right... and...

Folks... I spend a lot of time in the Kubota B2410 seat. I would like to replace it with a nice adjustable hydraulic damped seat with arm rests. I can do some mods to make one connect to the tractor... that is not a problem. has anyone done this? Any recommendations? Thanks! Butch

Here is my original post.... wait till you see what I found... My trusty B2410 HSD currently has over time become stiff and sluggish. It does not center in neutral for crap... Any thoughts BEFORE I get up close and personal with it? My tractor has almost (drum roll please) 2000 hours! Looking...

Guys... My trusty B2410 HSD currently has over time become stiff and sluggish. It does not center in neutral for crap... Any thoughts BEFORE I get up close and personal with it? My tractor has almost (drum roll please) 2000 hours! Looking forward to your all's two cents! Butch