Search results

I wanted to buy the EA 55 grapple but after reading all the EA BS I bought the Catabwa 55 grapple that is very similar to the EA product. I personally would not support any company that took advantage of their customers.

We always have had a German this guy is around 120 and loves the snow. So here he is saying to me, get your ass out here and play with me. His Domain

What the heck caused the end of that cylinder to fail? Was there an impact on the implement attached to the three point?

We had 2 diesel fuel tanks an 8000 gallon and a 6000 gallon that we would fuel our trucks, heavy equipment and small diesel locomotives. For years we never had any issues until we ran into an issue with slime in the locomotives tanks. After that we used a biocide treatment that cured the...

How does the PTO driving the trailer driveshaft sync the the wheel speeds between the trailer and tractor, guess there must be some kind of transmission setup for reverse.

I have used my FEL for snow, I make sure it is tilted up slightly so it will not bite into any gravel. Depending on the situation I found activating the float function works pretty good.

I kind of ran through the video (way too long). My question is the wear scar test, is it performed with the additive alone or is mixed with diesel fuel?

On my L3302 if I stand up so no weight is on the seat and just lightly tough the treadle to slowly inch forward it does not try to cut out, a little more on the treadle and it will cut out.

None near me but. https://shop.advanceautoparts.com/p/mobil-1-truck-suv-5w-20-full-synthetic-motor-oil-5-quart-15010/12082638-P?selectedStore=8600&searchTerm=mobil1+ow20

If the seals were replaced and it still leaks past the seal lip then most likely the shaft has an issue or the bearings or bushings have excessive play. I would first clean the entire area and confirm exactly where the oil is coming from.

use SPERKS15 code 15% off

It is marketing. https://mansfield.energy/2023/01/19/what-is-it-kerosene/ You may have heard kerosene and “Diesel #1” used interchangeably. While they’re not exactly the same thing, they are similar enough that the terms often overlap. Diesel #1 is a product with a lower density and flash...

My manual states No 1D S15 fuel for temps under 14F. Me I would mix it. No1D and kerosene is the same.

The dealer welded 3 hooks on my bucket I have used them countless times. I dont see what the fear of welding hooks onto the bucket. Way cleaner than any other method.

After greasing my mini excavator with a manual grease gun, I finally broke down and bought an electric grease gun. Greasing the tractor is a joy compared to hitting all the grease points on the excavator and man I am tired of pumping. Hopefully this should make greasing everything faster with...

Yea it seems that now nomenclature is picked out of a hat. My excavators aux circuit on the boom is called PTO in the shop manual.

LOL reminds me of years ago guys claiming that carbs were better than the scary electronic fuel injection. The same guys were out in the cold bitter days with screwdrivers holding their chokes open to get their cars started. I have three saws and the one that always starts easy is my 562XP with...

I have 54 acres and have a L3302, I bought it mostly for mowing duty and it does that job just fine. I have used that tractor for moving lots of lumber for our new house. I have used it for clearing trees that I have cut down, moving rocks, spreading gravel and a few days ago plowing snow...

Will not start is with the Clutch pedal pressed down. That is when the clutch is disengaged, up clutch is engaged.

The clutch is for the PTO to shift the transmission from say M to L you stop the tractor and change the shifter position.