Search results

Man that sounds like one of my cousins. Da-- i wouldnt get you 2 togather. He went to dog pound let all dogs out because he didnt want to see them locked up. handy

Ipz2222 yep I would as matter of fact. I did break it my grandson was here and the toe turned totally sideways .I grabed it pulled up put back the way that looked good. Grandson said papaw that was gross. Same thing the emergancy room would do but cost nothing that time.handy

Its probably a c clip with 2 small ends on it with holes in ends for the tool to fit in to spreed the clip. when you log on to forums make sure you check the small box remember me. I had the same problem until I checked the box. Once you put the rod back on remember kubota makes a plastic shim...

Dont overheat it . When it is warmed up to operating temp. fill the radiator BUT BE CAREFUL DONT GET BURNED. If you feel a cooler area than other may be stopped up.Have you tried to backflush it ?

Thanks for the post . I will be needing some soon.handy

On my B7100 if you look on the left of tractor in front of clutch pedal at bottom there is a hole in the side panel cut out round appx 1.5 inches round. Use a flashlight look in there that is where mine is dont know if yours is the same. Hope this helps.Its about 3 inches deep.handy

Derek welcome to site if its kubota its here and butch found a friend:)handy

Can you weld it back on? If the old one is destroyed get round rod same size cut to length weld it on. It needs to be a hard rod or make it out of a grade 8 long bolt half threaded the same size. handy

I agree with vic good to have you on site.handy

Good post kubotaTech glad to have you on site we have a few good techs. Thanks for your post and answering his question.handy

Like your tractor bulldog. NICE ONE mine is a baby compared to yours but I take a little bite at a time.handy

I will confuse you more. I like my box scrapper more also it is 4 foot dont get one to large for your tractor. I have a b7100 I have leveled drive spread rock pulled up rotten stumps with the rippers which the blade doesnt have. I also have a pond scoop for hauling rock ,dirt, digging ditches...

http://www.colemanequip.com/Kubota_Parts.asp?gclid=CPuv-vSnmZ0CFRwhDQodCiKr0g try this link for pictures and part numbers. handy

Welcome to site this link will help you with part numbers http://www.colemanequip.com/Kubota_Parts.asp#Compact_Tractor_Parts handy

glade you got it going if those washers are over tightened it ruins the spring action they are made for. Definately wont work if not turned right.handy

I saw the post you were talking about wished they would stop that but vic and mr k do good jobs at deleting them ASAP. handy

:oI Have a dumb question have you had someone else raise and lower the deck and you watch to see if one of the hydraulic lines may be getting pinched off as deck moves up and down? handy

Thanks for jumping in there kubotatech told him someone with knowledge would come to his rescue.handy

Whiskey5Th wish tou didnt live so far we would get along good Love your pics.Love those 1911A .handy

Sorry you are having problems. I do not have that model if no one answers sent SERVICE DEPT VIC a message sure smeone will jump in shortley.handy