Search results

I would probably look for a used front end.

The tractor will drive , but you will no longer have 4wd. The side you leave the gears out will be the side trying to give you traction. I’m not sure if it will pull to the one side or not during certain traction situations. You would want to make sure it holds oil for the differential and the...

I believe there’s 2 fill ports on your front end. One on the hub and one on the axle housing.

They should have had gear oil or the factory fill Kubota oil. Do you have a leak somewhere?

Very good point!

This is leaking on the transmission above the Hydro filter where the front drive shaft leaves the trans.

The only reason I’m considering the electric is due to cost. It’s a few hundred less. With the electric kit it’s just a control box on the tractor and a electric motor on the blower. Very simple install.

After running the machine at idle the leak seems to be coming from above the drive shaft. I brought it to the local dealer. They said it’s covered under the drivetrain warranty.

At that time around 114-120. I now have 176+-

So the kit can control 2 different options on a single attachment? Like on a blower, the shoot rotation on one set of couplings and the shoot top on the other? The dealer has the LP electric kit in stock. I may consider this route unless anyone knows a reason not to.

Why is there 4 Couplings at the back? I assumed there would be 2.

Check you expansion tank cap. There’s a recall to have them replaced due to the vent hole blocked from the manufacturing process. Mine was doing what yours was and after I cleared the hole out (by hand) with a drill bit ,it stabilized.

I noticed my front diff oil seal is weeping and my trans oil seal is leaking a bit. The trans side is a little worse as it has a occasional drip. I cleaned both areas up and will keep a eye on them. Is this the norm for the drive shaft seals? My Can-Am Commander would do this also at the...

Thanks. Looks like I would have around $800-860 for the tractor and blower sides.

Thanks for the pics. It looks like my local dealer is the best priced at $332. I do the the 2670-1 so the kit is almost 100 cheaper than the 2670.

How bad is the install of the Power Beyond on a BX2670 ? I’m looking to add rear hydraulics for my rear blower chute rotation. I’m not finding much for prices on Messics or Germanbliss web sites.

Blower is Sold

Most fillers are freaking out due to a smaller refund and don’t relieze they paid in less. I paid in $1009 less in ferderal and getting $212 more back than last year.

My uncle still has one in the box from the 1930s.

Here’s another pic