Search results

I'm sure that the appearance of an exhaust-related code is quite frustrating, having experienced the same issue with a diesel truck of mine. Other than the above ideas from my previous post the only suggestions I have would be to attempt (or have a warranty attempt made) to clean the EGR...

You could find pallet forks much heavier; I acquired a LP PFL1242 @220 lbs and they work just fine! The lift capacity of your B2301 is roughly 1Klbs so that more or less should narrow your search; no need for '4K' pallet forks or the like.

Interesting....Has the opposite side suffered the same fate? The support plate idea is a VG suggestion, perhaps the best way to go. Another thing; in using two side-by-side boards it seems that you forced the attachment plate of the caster to perform 'double duty', both caster attachment point &...

Does anyone have an educated guess as to how one's elevation (I'm right at 1K feet, western MA) figures in to the degree of affect with regards to the smoke? When I look at pics of NYC it seems that the lower elevations may be getting whacked harder than I am, which is somewhat difficult to...

Welcome to the forum @grsiepka, I feed my chips into an identical trailer as yours (Ohio Steel); my blueberry bushes love that stuff!! :)

Tool(s) in back pocket?

Yeah, the Woodland Mills WC-68 is made in China, but it a heavy-duty SOB and it works very well. 100 LB cutter wheel w/4 cutting blades, hydraulic feed, safety bar, feed chute folds up for compact transport or storage, very well designed unit IMO. Hydraulic feed is a must for a machine of this...

A friend of mine worked as a water tester before he took up a different line of work; he told me some horror stories about MBTE, which gets into the groundwater from older leaking gas station underground storage tanks. According to him a very small amount of MBTE is all it takes to contaminate a...

Since you have already requested police investigation, I would recommend contacting the police with the information that the 'bag crew' were back and active again; request the police to increase their neighborhood patrols (or start neighborhood patrols) particularly during the hours of unwanted...

Although I have not experienced this issue on my B2601 with the LA435 swift tach system, I'm of the opinion that the damaging of the loader stand retention pins is related to bucket dumping and the position of the loader stand release lever (left side of loader boom when seated on tractor). In...

Those damn bees are like flying tanks; it seems no matter how hard you strike them they just shake it off and fly away. My greatest success has been swatting them to the ground and stomping them, they are tough bugs for sure.

If it's a 550XP mark 1, sell it. If it's a mark 2, keep it! ;)

I think your'e lucky that you have some 'boys' to hire! Sounds like it could be the start of a productive relationship for both of you. No one is getting any younger and that hill will be probably be even steeper next year should you try to tackle it yourself. :) That they did a 'great job'...

:unsure:

I've got a Honda snowblower and the engine makes all kinds of extra noise; I think the engine is a GX390. Every season I wonder if it's going to come apart but it just keeps on ripping on....The oil looks fine as well, never figured out what the source of the noise is.

I've got the same Greenworks polesaw that @85Hokie has listed, along with another GW chainsaw & leaf blower. The polesaw gets lots of use and is highly recommended, it works very well. The 'pole' can be reduced in length (or even extended with an additional section) for increased versatility...

You may find that the pop you heard is actually the result of the tight fit of the snap-in cover for the front axel; my cover is quite a task to remove since the fit is quite tight. I could easily see a new owner thinking that there is a pressure build-up in the axle due to the fit of the fluid cap.

I have the app, I've noted all the serial numbers for my equipment there, might help someday if I'm in need of those numbers for some reason. I also keep pics of all my equipment on my phone.

About 3 weeks ago my dealer picked up my 1 year old B2601 and returned it 3 days later with a brand-new BH70 hanging off the back of it. Yes, I'd been waiting about a year for the BH to become 'available', and I got several opinions on why it took a year for my ordered BH to get to the dealer...

As far as the swift-tach hydraulic connection, that is the last item to be disconnected when removing the loader assembly; at that point the part of the loader that is blocking the swift-tach lever is out of the way of the hydraulic connector, allowing it's complete unfettered removal. It may be...