Search results

found an old original sales brochure for the B6000, specs , info etc. also shows some of the extras available, i would like to get hold of one of these dozer blades and a rear trencher.... rob

I've been looking out for a FEL to fit my B6000 for a while without success till now. I won a FEL on ebay and the guy says its a proper kubota item but wasnt sure what part number it is. can anyone help me out with iding the thing. Now i've a genuine kubota sales sheet for a B629B backhoe which...

just a quick one guys. on the b6000 i,ve got 6-12 ags on the front, will 12.4 -16 be too big for the rears, if so , is it the height or the width or both. thanks.

hi all I am in need of some help identifiying my rotovator. I won it on ebay recently for a good price and despite its looks it is in very good running order and after a good cleanup with soap etc it n ow looks realy good, a few bit of paint need doing but thats all. its got all the original...

hi all, just aquired a S850 rototiller for my B6000, its in good working order but the paintwork needs tidying a fair bit. A couple of questions to those in the know, its missing the 2 arms that connect to the tiller to the upper rear lift arm on the tractor, does anyone know the lenght,diameter...

I'm looking to change over from the original genarator on my B6000 and fit a newer alternator setup to power extra lighting and a front mounted 12v winch. My question is this, there does not appear to be any obvious mounting hardware for such a conversion on the B6000, althought there are...

I want to fit a 12v winch and some extra lights(nothing to powerfull) just aux really to my B6000, but i suspect the original generator is not really going to be upto the job. Manual spec says output of Daytime- 90w and night -60w (30w used for exsisting head lights). The question is, will i be...

Hi all, as in the title really guys, i need a backhoe and it need to fit my B6000, what are the options available to me and what will the situation be regards to the reverse pto, even with a backhoe with its own pump systems etc. also i've seen some used ones on ebay , listed as kubota units...

hi all just a quick one , i need to replace my front wheel hub nuts/washer setup so as to be able to use newer wheels and nuts. does anyone know what the thread spec of the studs is, i need to know the the thread pitch,size etc so as to find a suitable alternative that has a proper convex...

hi guys, i'm looking into do an engine rebuild on the b6000 and could use some help to be honest. I'm not too bad at mechanical things, rebuild and restored my ducati 955 race bike a few years back with great success also several of my classic cars etc but never delved into the mysterious world...

Well then guys, i've finnally found the answer to the big question, "what size tyres" do i need. if you need to replace the rubber on your machine and want to use something else, such as, a truck or 4x4 tyre to use on grass etc, and need to find an alternative but are lost in a minefield of...

With all the size comparisons and calculation to make on the 4wd tractor setup can i ask for a reasonable accurate answer to the following. Having sorted out my rims for the front and back , i;ve got some nice new 10" rims on the front of my b6000 with 20x8.00-10 floation/turf tyres, i found one...

Does anyone know if the rear wheels from a B7200 will fit a B6000. from the pics I've seen they use the same sort of slide on axle hub fitting, but is the shaft the same size as size as the B6000 shaft. what is the stud pcd spacing and pilot hole sizes aswell. I'm pushed for time on this one...

I have seen a spare motor which im thinking maybe a good spare for my B6000. It is marked as a Z600, anyone know if this is the correct unit or not. cheers rob

any of you guys out there happen to know the rear axle half shaft dimension are.(Hex section the hub slides on to), is it 4.5" or larger. also does it have a specific hub for it or is it generic to several models. thanks in advance rob

hi all, still on this wheel issue, there seems to be an error in the specs somewhere on this subject. I have have seen two conflicting pieces of info. can anyone clear it up and confirm the correct version please. this is what i've seen in the last few days. pilot hole is 90mm bolt pcd is...

Hi all, I found a source of PTO reversers for my B6000 , my question to you all is simple really, are they any use, and are they real value for money. I,ve found them for 595.00 euro's, or for us in the uk £585.00 this does seem a bit steep for what you are getting , they are new, but still ...

hi all, thanks for all the replies so far to my other question, so i thought i run this by you all for some feedback. I want to use a tipping trailer with my B6000 but its not piped for one, what is the best way to do this and what will be required , i suspect that if the trailers hyrdo...

Hi can any assist with a wheel/tyre size problem I'm having with my B6000. The tractor came with agri tyres , Fr 5x12 and RR 7x14 but i also aquired a second set of wheels with new bridgestone "farm service " tyres, size are: FR 6x12 and RR 7x14 , but they look odd to be honest and the tractor...

Greeting all I recently purchased a nice B6000 to replace an ageing wheelhorse tractor that has been well and truly wornout;) now. I found this site by luck today whilst searching for info on the B6000 tractor, and by all account, this seems to be an excellent source of info and help. A few...