Search results

I would use teflon tape. Pipe thread right?

My first two questions would be how big is the engine and how many watts is the heater

And you have over torqued for 30 plus years. I don't know about Canada but in the US unless otherwise specified the torque value is for clean dry threads. I was even taught this in A&P school. You have to adjust the torque depending on the lube. Some lube calls for a 50% reduction. Wonder if...

I'll make the sacrifice and volunteer

Ha, same hose. Tough part was getting the hose started on the fitting under the seat.

I had one fail while I was moving snow. It was the one that comes out of the bottom of the loader valve and winds up connecting under the seat. Took it to Oreillys and they made a new one. Was not a real tough job. I didn't have to remove the seat just the access panel where the 3pt adjuster is...

One thing that aggravates me is the lock for the loader control lever. My leg hits it once in awhile and locks it.

Misunderstood

And talk about a new tractor every time you go in there.

The picture was for concept. He doesn't need caps. They're already there.

If you get tired of it take the ujoint apart and see if you can make/borrow/rent a puller. Picture for concept. A jaw type might work if you can get the jaws behind it

Stay out of the line of fire when you get that strap under tension. You have a several thousand pound sling shot. Try a little heat with a propane torch.

I bet I'm not the only one here that remembers these

Okay, I saw a thread where somebody posted some pics about installing a relay.

Our family made that drive from AK in 72. 1300 miles of dirt road back then. Took three days to get from the AK border to Dawson Creek(I think it was Dawson creek)

What would that clicking sound be? His tractor is doing the same thing mine does if I don't push the clutch pedal all the way down or have my foot on the HST pedal a little too heavy. Makes me wonder how many different ways Kubota wired these things. Good trouble shooting steps BTW

Dang it, I meant to put this in the block vs oil pan thread.

Steam cleaner set to low pressure. I hit everything, even the cup holder.