Search results

So the loader modification is done and works good. Started on the left fender. It is a tad rough. Cleaned it up with wire brush on a die grinder. This is giong to take a while.

If it did not leak before then I would pull the filter and make sure the aeal is OK.:D Dusty

Dampener?:D Dusty

Vic I want all those tractors. Sweet. They would keep me busy for a long time.:D Dusty

My timing sucks.:eek: Dusty

Forgot to show the finished mount here it is.3/8 x2 1/2 on front,1/2 x 2 on the back. :D Dusty

Forgot to show the finished mount here it is.:D Dusty

That step was pretty Quick cause I couldn't get on the tractor. An it was snowing like crazy. Anyway I finished one side of the loader mount. I better get my but in gear, it was snowing this afternoon.:D Dusty

Looks good Meanjean.:D Dusty

Hi tx. Just an idea. Check the trani vent it should be under or behind the seat. There are different types on my B7200 it was under the top of the top link bracket. On my B8200 it just looks like a bent over bolt on top of the rear diff. If that vent is plugged it can cause such things. Hope...

Ya we are already planing the next big guy. I am waiting for parts so I am working on the loader mounts. The loader is off of a B7200 and after installing the loader the tractor would not turn very sharp. So,, I am doing some modifications to the mounts. By the way, I am outstanding at the drop...

Hi DsBota. I finally remembered to check today and those are the same size as I have on my B8200. The only difference is my fronts are 8.5 wide. I looked at a couple of B21 s online and they do have 6 stud rims . It doesn't mean that will fit but it is hopefull.:D Dusty

Ditto on what traildust said.:D Dusty

Awe I was just yankin everybodies chain with the Kleenex. I only set fire to myself not things around me. Ya its good to be back working on a Kubota. All summer it has been everything but the Kubota.:D Dusty

Well I have that project Vic and I hope it doesn't take as long as the B7200 or I am gonna be beating my poor little Steiner to death pushing snow. The Steiner is a dynomite machine, tough as nails. But it aint no KUBOTA !!!:D:D Dusty P.S. Thanks for the encouragement.

I really really like welded nuts, I do it on pretty much everything I build.:D Dusty

Forgot to show pics:o Dusty

Sorry Lucky, that seal is going to have to wait. It is seeping a little but thats it. My hydraulic oil is leaking in two spots and I haven't looked to see where the engine is leaking. So, I made a new battery tray and it is not part of the fender like the old one. The left fender is in rough...

Right now I am making a new battery tray because when I pulled the fender off the battery pretty much fell in my lap. Once I get the other fender off I will take it to the car wash down the street and clean it up so I can see where all the leaks are.:D Dusty

My loader keeper upper is noched top and bottom, it will take a pretty good whack to move it. Kinda wondered if some one would mention the kleenex.:D I knew the tractor was rough but :eek:. I have only had it for two years. This is the first time I have had it this far apart. Some stuff will get...