Search results

Op, assuming you did the job on a cold tractor, I wonder if removing them when hot would be easier? I would think it would loosen up the rubber gaskets.

I would look into getting a battery maintainer and a block heater. I have maintainers on everything I have. I wish my L had a block heater, but oh well.

I think the battery in my dad***8217;s L lasted 11 years? It never really failed and was just slow to crank. It was later given to the pressure washer and used for another 2 years.

For me at least, Coleman has a better price on shipping.

The little L and larger B may be too big for your mowing needs. Since you already have a larger tractor, I***8217;d go with a small B personally. Are you certain the BX is too small? Is mowing your only intended use? No front end loader (FEL.) You never mentioned a mid mount mower (MMM) or...

Re: Marvin Mystery Oil In D950? Did you forget you commented on this post previously?

Re: Marvin Mystery Oil In D950? I havent dug into one of these before, but if its only acting up at a certain time and was previously neglected, perhaps the oil pump pickup screen is clogged? You might try filling the crankcase entirely with diesel fuel overnight or longer. Rotate the engine...

When I was briefly interested in a used L3301 that was owned by the previous homeowner, my dealer told me 60% of new was about right assuming it was in great condition with low hours. That said, I can***8217;t see selling my L for 12k.

Loaded tires, a bucket level indicator and telescopic rear link arms.

The trade makes sense. Thanks for your review. My allergies have really spiked up within the last 5 years.. Being still young, I***8217;m worried what could happen as I get older. Dad went through 3 larger Kubotas before finally settling on his cab***8217;d Grand L for this very reason. It...

It may weaken them overtime because of the unnecessary stress. I’m not sure. As said, industrials have thick sidewalls. Not a good idea to deflate them IMO.

If anything, it'll put unnecessary wear on your tires.

I***8217;ll have to check them out when the time arises. I try to get the freshest battery I can find. Not sure if it matters, but newer certainly doesn***8217;t hurt. It***8217;s always been my experience that batteries at farm stores are older and dusty. I do like Deka batteries. Same as...

As a kid, I was hauling some concrete chunks for my dad in his L. Went down the driveway in 2WD and the rear wheels lost traction. The tractor was basically teetering on the front axle because of the excessive weight. I was very close to hitting a fence. Yeah I***8217;ll never make that...

All of my different year Gs as well as my L2501 use the same key.

In the US it’s made my Ashland. As mentioned, I’m not sure who does it in Canada, but it looks like you found the answer. I agree with you as I seriously doubt it’s simply rebadged fluid made by whoever depending on the region. Just buy the Kubota stuff from a highly regarded vendor wherever...

I’ve read Kubota Super UDT2 in the US is brewed by Ashland. Could be different in Canada. Same conglomerate that owns Valvoline and Zerex antifreeze. I asked the same question about the statement being fact and was given the SDS. I imagine UDT is made by the same people, but I’m not certain...

Definitely fixable. The hole in the deck could be adding to the cutting issue, but it sounds like you don***8217;t have tension as the middle blade is connected to the gearbox and PTO from the tractor. Tighten up the tensioner on the deck if you have room and see if that fixes it before buying...

You may be able to find the actual Mitsubishi part and be cheaper than Kubota.

Im not finding any links to this tractor. Just curious what it looks like and such. Eliminating the larger B models makes sense IMO. Going by Kubota 01/50 logic, the 2601 should be a base model of the 2650. Instead its 3/4 the size. Very misleading at first.