Search results

I was going to post something you probably would not have wanted to hear.. the 60 inch mmm being too big for an 18 horse, but I saw you stepped it up to a 23. Good move IMO. I am sure it can be done, but I would personally want the smallest deck possible with the 18, which IIRC is a 48. On a...

If the fittings that are stripping out are plastic, I am betting the failures are user related.

You can get all difference sizes. What are you pulling it with and what are you planning on hauling? Do you have trailer brake controls? A place here has a little single axle 2500# model all the way to a double axle 10000#+ model.

Does the heater instructions say to use a sealer on the adapter that goes into the block?

I***8217;ve read the 3 point and FEL need to be as low as possible when checking the level. Not sure what that means since you have a BH though.

See if you can find a serial number here? My older G tractors do have some serial number specific part numbers. Hopefully since things were simpler then and there arent too many differences.

Nice. How long does it take to see results on say a small L? The 400 watt block heater on my G can warm the block in about an hour. Since the heater is right next to the temp sensor, it can actually overheat the block so I need to make certain not to keep it plugged in too long. As soon as...

What brand of remote switch are you using? Does it need internet?

Is this something like Harbor Freight? lol

Ouch. Hopefully I didnt do any damage. This is sickening.

Makes sense. The rental place is a hardware store. Their rental tractors are commercial B26s and nearly identical in HP. Youd think they would know better.

I rented a LP RTR1558 yesterday to prepare for our tree planting this weekend. In one area, I hit an ~8 inch rock and before I could react to the engine stalling and disengage the PTO clutch, it died. It fired right back up and everything seemed fine. Was I doing something wrong? Next time I...

Re: Parts availability for “GM” Kubotas. I tried googling it and couldnt even find a photo. Very rare indeed.

Any chance the knocking could just be a surging/ vibration that is felt from plugged fuel filters?

Re: Parts availability for “GM” Kubotas. Mods feel free to edit the title.

Re: Marvin Mystery Oil In D950? Yes. If it was simply a flickering light I would have said to check with a oil pressure test gauge, but with a knock there is no need IMO.

I had my tractor out in -15*F weather last winter and believe it or not, the fuel was starting to crystal up when the engine was cold. The fuel almost looked like a pinkish apple sauce vs a liquid. The tractor ran fine and the fuel thawed in about 30 minutes of running the tractor, but this is...

Me being an orange fan and thus having an interest in the vintage and/ or Japanese market stuff, Im curious how difficult it is to find parts for these. Its my understanding that while some models can be cross referenced to US equivalents, others cant. I have also read that technically a dealer...

Re: Marvin Mystery Oil In D950? What would have been causing the knocking?

No need for an exact size. Just get the biggest one that fits.