Search results

$5,000 would be a bargain. You could always buy a 3pt finish mower.

Anything hit all these bogies? (Can't you add zerks if none installed?)

Why not get another I beam and run your (rough sawn) decking perpendicular to the I beams? You could run a few decking boards longitudinally the width of your tractor tires for more strength and to spread the load.

Your Kubota B series or Kioti CK series sound about right.

It's also handy tp have a length of pipe to use a s a lever to "horse" the implement around for alignment.

Bush Hog is another option. Does offset, angle and up to 30 degree tilt

WOODS

Two general methods to try Back it up for a bit and see if that takes some tension off Push the bucket down to take the front wheels off the ground and try it

BTW, how difficult was it to change the glow plug relay?

I agree with checking the ground. It sounds counterintuitive with a new battery, but you might try jumping it. If that doesn't work, relays, safety switches, solenoid (if it has one)?

On that, we agree! 🍻

If there is no cause for caution with EA: Then you should order your attachment(s), pay your money, Then wait .............

That is a sound solution, or you could weld the current "coupler" solid to make it a traditional pin on hitch, and use a twisted clevis. It's your money

Why not just use a twisted clevis on the drawbar?

If you currently have a problem, it's a very small one. Isn't everything functional?

What you say seems to ring true. I always thought the products looked good, the management not so much. Thanks for giving us an insider's poingt of view.

No matter what, there is a teachable moment for any CUT owner. Constantly scan your gauges and warning lights. It's not like a car where you can go thousands and thousands of miles without caution. A near miss is good way to drive home that point. I've used tractors for 60 years. Tat said...

Fair enough, but lots of posts wanted to clarify what happened. Now that we know that, it would be nice to know if any suggestions have been tried.

Okay, the update was posted yesterday in Post #1. Let's be kind, and no snarky responses. *************************************************************************************************************************************** While using my snow blower, the tractor stalled twice then wouldn't...