Search results

I found a place in Saskatchewan Canada,Yellow rose Ent ,1 306 232 5570

I found a place in Saskatchewan Canada,Yellow rose Ent ,1 306 232 5570,they had every engine cooling hose for mine and a fuel filter,the hose's appeared to be stock,I told them the model,they were able to tell me anything I needed to know about my ZL2202-DM

itfarmer,very sound advise,the hydraulics,gearbox and rear diff all share the same fluid,there is 4 drain points for this unit (I have one,just did this) It takes the kubota UTD or equivalent,the filter is up b the pump,spin on

I did a search and cant find it so if you need parts for your Grey Market unit in Canada,there is a place in Saskatchewan called Yellowrose Ent ph# (306) 232-5570 and ask for Sue,Mark from BC Tractors referred me to her and with in 15 minutes she had my 3 rad hoses for my ZL2202DT-M,one of them...

Pull the switch and take it to a lock smith ?

Thank you very much !! (y)(y)(y)

I was moving snow yesterday mostly with the FEl and a few minutes with the PTO snowblower,once the tractor was put away I noticed the site glass on the side of the transmission was milky(ouch),now,I am trying to find out what kind of oil is in this unit,it has a spin on filter on top of the...

Don't know if this will be seen but what kind of hydralic oil did you use,I'm getting cross referenced from 80w to 20 W

If you can weld and it is not cast,your 135 will do the job

One thing I found handy was a smartphone and google translate,ya take a picture or even hoover it over the Japanese and google translates it to English,now getting it into 4X4,I have read in many places on this form the linkages are stuck/rusted in that position,start lubing up the links and ya...

Thanks for the replies,confirmed they are not mild steel,the drill bit told me so :D

I hope the picture is attatched

I purchased a used 5 ft Kubota blower 3 years ago for a good price,it had some modifications done to it,not certain why but the two lower angles were sliced and bent and then goop welded(not factory welds). So yesterday blowing the snow one of the angles weld's(sort of) broke,now my question...

You can also purchase large enough hose clamps that will go around the ROPS holding the lights on to it,just a thought.

Like this one

I have a Grey Market ZL2202DT in Canada that I welded up my own,after doing some reading on ROPS I decided to mount it off the PTO housing that has six bolts to mount it to.Basically took a tape measure and guessed it all out,drew it on a sheet of plywood and welded it out of 2X2X3/16 ,overkill...

So from what I have been reading we can go to a Kubota dealer and order parts in Canada ?

Took this off of a security camera

Sorry about this,mine sits in a narrow shed,hard to get a good picture of it unless its outside

My ZL2002DT is running a Allied Buller (? on the buller) 90 or 95 and except for the color it looks almost stock,will verify exact name when its light out.