Search results

good evening all, i am about to jump into another project which has a bit more of an important usage for my now. I would like to run a dual or multiple battery setup on my B8200 as the need for 12v power has now increased and will probably exceed the limitations of the B8200 basic setup. I 'll...

Ah yes, i had a similar problem with both my previous B7100 & B6000, i was pushed for time so removal and refitting /bleeding system etc wasnt an option. What i tried was this, i loosened the injector a bit, not a lot but enough to free up the copper washer and then retightened securely, but not...

dont forget good old horse power;):D rob.

Hi Rich , i have updated your other thread ;) Are you 100% its leaking at that point and not further up around the fuel overflow linkages and then running down. rob

you will need part number 17011-53620 if using a genuine kubota part, or just take your old one into a car acc shop ( not sure how many their are on sark to be honest) and they should be able to match it without any problem. i have a box full of them in various sizes, its an easy fix, just be...

Welcome to OTT Rich, nice to see another uk based member ( allbeit at the outer fringes on sark;):cool:) . I too have a b7100 and they are great:cool::D, you wont be disapointed but you may find it takes longer to restore it than you think, they eat up your free time sometimes with very little...

As in the title really guys, what are the best bits about your orange friend :cool::D and also the not so nice bits :mad::( , the things about it that really shows it a cut above the competiton, but also those really anyonying things on it that just need changing or just removing:eek: I can...

many thanks for information and picture, that is just what i needed.:cool: rob

thanks for the reply. I require the sizes of the fuel tank (L x W x H) if possible also what the connections are on the tank. Is it held on by straps, if so what do they afix too. many thanks. PS, glad you got your loader information.:) rob

yep, ordered a fairleader a few days ago as i was having a few issues finding one that was the size i wanted, sorted it in the end and hoping it will arrive shortly.:D nice low profile item. rob

thanks for the replies guys, no special skills from me though , i just pickup bits of kit here and there and just decide what i want from it and then messabout with it until it does what i want.....;) none of my mods are that good, they just work for me:D have a good one.:)

hi all, i am about to construct an 2nd indepdant aux hydraulic setup on my non hst B8200. My project involves the fitting of many parts of which one is a new oil reservoir. From my intial findings the B8200, B9200 and b2150 share many similar parts if not the same, but having part numbers is not...

yep, welcome to you , you'll find an endless amount of help and info here on OTT:D:cool: It is you're one-stop sorce for all things Orange and tractor based, and more;) nice 7100 there, looks like its had a nice well looked after life so far. Ohhh yes , allmost forgot, welcome to another like...

couple more with the hood access .

Managed to get my custom front protection bar finished today and it has turned out better than i expected for a quick retrofit job.:) colour co-ordinated to my B8200 aswell, fits spot on now and the suite case weights hang just right on the side mounts, winch fits in nicely too and the hood...

having run this through my head again, as i said inmy earlier reply you'll just get your rear ags on the back turf rims, may need a tube in at to make sure it seats on the rims as its a narrower trye. you'll be neading a 23-8.50 x 12 ag tyre for the fronts if using the turf rim. .

maybe a better plan to get a good used set of the correct ag tyre/rims for it then you have both option depending on your usage. good used set will probably workout the same cost as a just getting the new tyres anway. used wheel/ag tyre combo's can be pickedup over here for just a couple of...

I tried them aswell as being in the uk they would have been a semi-local source, when i said gave them my wheel sizes from my B8200 (same as b9200 etc)they said they were unable to supply anything suitable:confused: maybe they dont stock a 12" size but 10" is more widely used....who knows:(

different rims are required , as the attached chart explains. you may at a real push get a 12.4 ag on a 13.6 turf rim , but there is no way you will do the same trick for the fronts, rims are miles different.

i'm thinking about extra lighting on the front, and now would be a good time to be welding on any lugs and brackets before i get the top coat out. A lot of you guys use LED's but i havent had much hands on use of them as far, any recommemdations on specific types and extra's i may need. I am...