Rob
Member
Lifetime Member
Equipment
B6000DT / B7100DP /B8200DT/L225/Globe PTO Chipper/Lewis Backhoe/huxley TR66
hi all, i am about to construct an 2nd indepdant aux hydraulic setup on my non hst B8200.
My project involves the fitting of many parts of which one is a new oil reservoir.
From my intial findings the B8200, B9200 and b2150 share many similar parts if not the same, but having part numbers is not allways enough on a custom build.
I was thinking of using a fuel tank from a 9200 or 2150 since the chassis layout is very similar and the same inmmany respects from the rear of the tractor.
on the 9200 and 2150 the fuel tank is mounted behind the seat, now based on the fact that the dimesions around this area on all 3 machines is pretty well identical i am hoping a fuel tank will fit my 8200.
what would be really good at this point would be some dimensions of a 9200 / 2150 fuel tank along with any bracket that hold it to the chassis and connections point on the tank.
any feedback on this would be greatly received.
rob
My project involves the fitting of many parts of which one is a new oil reservoir.
From my intial findings the B8200, B9200 and b2150 share many similar parts if not the same, but having part numbers is not allways enough on a custom build.
I was thinking of using a fuel tank from a 9200 or 2150 since the chassis layout is very similar and the same inmmany respects from the rear of the tractor.
on the 9200 and 2150 the fuel tank is mounted behind the seat, now based on the fact that the dimesions around this area on all 3 machines is pretty well identical i am hoping a fuel tank will fit my 8200.
what would be really good at this point would be some dimensions of a 9200 / 2150 fuel tank along with any bracket that hold it to the chassis and connections point on the tank.
any feedback on this would be greatly received.
rob