Search results

that kind of "I" bolt looses drastic capacity with any side load

L3130 fuel laeking from the fuel pump / not a lot gust enough to make area wet / cleaned every with paper towles / is for sure leaking from pump / not hose conects/ got bump comming / Question tractor bogs down when trveling down the road almost will not move in high gear / just srarted / FUEL...

Hay old timer your valve assembly shows 2 hose conections / Yet you have 8 ports on your back panel i'm confussed how dose that work ???? Not being a wise ass just missing something???

Pulling this behind a L3130 picture befor comp. 250lb plus after i finished it / graded about 1 acer at my sons / clamped on a 6' I beam & straped on 10 cement blocks hard ground pulled it no problum

Just changed all filters & fluids used / wix air, oil & fuel /ballwind hyd & fleetguard trans /came with the tractor when i got it / just want to have a set on hand /

What i have found & im on 100% on all the filters oil /trans & hyd made by fleetguard best info i can find on the net

OK Anybody use these ??

OK servising my L3130 front axel U D T oil or gear oil / My thinkig U D T is kinda light in Viscisity ??

Bought clevis end hooks from harber fright & cut off the clevis ends / welded to 1/4" X 4" flat stock / the reese hitch got from tractor supply its just a tube with a hole in it / pad eyes are 1/2" with 3/4" holes for 3/4" shackles

more is always better

Also have a L3130 just install a Summit third function kit/ just had to modify the front quich cupler bracket / just a small "L" bracket on the back side/ will get you picture (will be a bit recovering from spinal neck surgery) pic. of UHMW plastic hose brackets / was a sinch install / took...

You can use wood in place of UHMW plastic i used two pc 4"x 12" i used 1/4" because i had it 1/8" will do pc 3/4"x 3/4" sq 4" long /a pc of 1/2" black pipe will do / Slides in no bolts

Have some down time after neck disk surgery to down load pictures to the laptop just some of items built for tractor /Cultivator had for a while / Chainsaw mount just slips in 1/4" plate UHMW plastic to hold saw / Land plain before completion added two 4"x4" angles for cutting edges/ 1/4" plate...

Thanks

Contacted prev. owner only Kubota Fluid / Have to ferguson TO20 50 vinrage will fly down the same road to my sons house in high gear /will not go full theottle gust to fast / hauling same impl. no loader there only 20 hp /the kubota is more then fast on the flat just boggs down on the inclines...

Don't know what hyd oil in it like i said it came with a gal jug of kubota oil so im assuming it has kubota oil in it has o, e, m filters also

Tractor sup. udt2 same a.s.t.m spec / no diff. aditive pack the same / have a gal. jug 1/2 full came with tractor of kubota udt2 reads word for word as Tsup. added the kubto hyd, oil because i had it /farmer frend has two 85hp kubotes using Tsup, or royal king for years ( All that said do you...

Eng RPM drop to nothing / will stall if i let it / let up on peddle RPM increases

It was serviced befori got ?? / Think i will service all fluides & filters have a set of filters to have on hand / using Tractor sup. hyd oil only added about 2 quarts after third fun. install & grapple use / just a wow with little fork having same isue / same tractor ??