Search results

Paul, your minor mistake is easily corrected......just order the QA. It makes changes between bucket and ripper so easy. Like 85Hokie said....the bucket is heavy and lifting/wiggling into alignment for the first pin to be placed can be a struggle. With the QA you always have one pin on both...

And for those times when you just wanna make sure they don't get away................

I have the Betsco EFGC125 with the heavy duty hammers. It gets alot of use each summer behind the B2650. Both clearing/maintaining trails and woods, and also cutting ditch grass and corn patches. The flail does require a little maintenance....especially after the first few hours of use...

A week ago a neighbor lady called me and asked if I had seen a giant bird in our woods. She sad it had flew into their glass patio door that night when their little dog was sitting there looking out into the yard. It was dark out. This giant bird was dazed for a minute sitting on their patio...

A proper fitting box end wrench should get that clamp nut loose. There's also battery clamp pullers made just for removing the clamp to prevent damaging the battery post itself or its internal connections.

Those winter front covers look mighty nice on your tractor!! :) That's a nice tractor setup for sure!! (y)(y) David

Not knowing exactly how my concrete would have handled a two post lift, I would have had to bust out and pour new supporting concrete bases for a two post lift. I was also curious how critical knowing the balance point of each setup would be for each type of "lift" on a two post lift. When...

Here's my Kubota Lift. I can lift the Kubota with any implement mounted and work underneath. Or store anything up above when not in use. My concrete floor was my limiting factor for a two post lift. But after finding this one, I'm much happier with it. Plus, it can be moved around as...

Here’s the new BX winter front cover that will fit all the BX ’80 series compact tractors, including the BX23S. This is a one-piece cover that attaches with concealed magnets to the air intake grill work below the steering wheel. And just like the other covers available, it requires no tools...

I didn't know Olivia Dunne was a member?

that makes at least two of us!! :ROFLMAO: My motto: A clean work bench shows no work being done!! That's how I justify mine, anyway.

If any one is looking for a way to help keep their engine temps up in the midrange during wintertime cold weather use...... I still make a set of winter front covers to fit your models. You can find the pics and other links/info here. Or start a conversation for any other questions/info. I...

It might have been my one shining moment in life! :ROFLMAO: There is no real need to bolt it in place. Once we got tired of unbolting to switch positions, I made a pin for that 1/2 inch hole. Much quicker to switch positions and no worries of it going anywhere. A set of quick couplers at...

This SSQA method worked out ok for the Samurai that my neighbor and I purchased.

Gently heat them up with a heat gun to soften the knob up should help. Same for putting the knob back on.

My grapple dolly build here Instead of wheels for your situation you could make and weld on some pads instead. If you were going to lift and stack it using forklifts you'd want to strap it down or provide for some means to keep it from tipping while on the forks. The way it is now makes for...

I would be concerned about the overall weight of this planter. Unless you're able to really work the ground up well to a fair depth, you might wind up with a lot of seed just laying on top of the ground. In a small rototilled garden setting it might work great. Depending on how you're...

Here's a link that will search "All of Craigslist": All of Craigslist (searchcraigslist.org) Searching "Corn Planter", and other terms will bring you some results from wherever their location happens to be. You'd think there'd be a time something that would turn up within a days driving...