Search results

Heavy Duty warehouse type racks, like Home Depot, like 3ft deep x 10 or 12ft long x 8ft tall and two shelves It would be IDEAL. Especially if you have forks to pickup and move things onto the shelves. It would be a storage game changer in my shop. I need SSQA Forks.

I cut grass with my BX23s and do not step on the deck. Adding a step helps alleviate the stride distance, and I have a plan. More to come. 😉

Some reading material.while in intermission.

Good read. I like seeing and reading people approach what they have at their disposal, whether it be tastefully repurposing, and/or a mix of must-haves to fill the need minimally. Like myself. Nice looking retreat. Since buying my BX23s this past August, I really need to come up with some...

Thanks. I did not have the deck on, or test for interference prior to making the step. I kept the bottom of the step flush with the bottom of the rail that supports the FEL Pedestal/floor pan, so it "should" clear the mower deck when raise at the highest setting. I'm undecided if I want to add...

I had the tread on-hand. @Runs With Scissors Done 👍

For line identification, I use (3x) 1-1/4" Marine Shrink Tubing over the crimps. The product glues itself in place.

Lotta speculation going on in this topic, it'd be nice to know the real answer. Maybe we need an AI Bot.😳 NO!! 😂

I have the Kubota edge (HATE the bolts holding it on) and the Pihrana. I also hate the fastening design of that. Bolts are material catchers.

If I can find some, I have plans to put a piece of Aluminum or Stainless Expanded material to make it non-slip. If I can't find any, I'll drill, tap, and Loctite a dozen or so short Stainless bolts.

I do.

These are ready-made, used in conjuction with internet/server pedestals. Sizes are written. See images Only one for now. Plot, drill & bolt.

Would Budlight Platinum work? That's my goto when I indulge 🤣

You don't mess around. That mount would withstand moving a tank...lol. Nice work.

That's an understatement. LOL. I'll figure something out!

After member input, look in the used market for a Cat1 QH (if going that route) before buying new. You might find a deal out there.

I considered magnets for lighting. Not for the cans. I want a permanent stationary solution.

I used the same on my Snow Plow.

I suffer from the same brain strain. Location, location, location. My wanting to keep it/them inside the stance of the tractor, has my sensible creativity about out of options.

Since getting my 23s, that seat switch has gotten me many times. I have a hill I traverse, and if I do not have both hands on the wheel, a firm grip pushing my butt into the seat, along with my feet on the floor pan while pushing back on the seat, the tractor dies. Next thing I know I slid to...