Search results

I do some boat storage over the winter and I have between 10-30 boats on trailers so to deal with. So I ordered the following that works on quick attach on the FEL Receiver Mount Plate

From the Kubota site the list below are the ones recommended for the B2601 All three dealers I visited when I was shopping for my B2650 recommended the B2782B - 63" Also GP Outdoors (Good YouTube channel) has a B2601 with the same blower you can see here...

One big difference in the L to the B, is mid PTO connection - if you dont need you can save money on your tractor and maybe get more attachments. In my case I went with the B2650 because I wanted a front mount blower which requires the mid PTO. My driveway is about 1800 feet long and going...

I have the RCR1260 - it was lower cost then the 1860 and because I am cutting mostly tall grass/weeds in our fields it is what I was looking for. It will go through up to 1" woody material. So far I have had no issues cutting away the grass and the small saplings. I finished up around my...

Been getting it dirty! Loving it so far. I moved about 50 cu yards of old manure out my coverall. Moved and levelled out 20 cu yards of gravel to resurface in the coverall. I dug up an old water pipe that was leaking and have just yanked down an old light pole. The wife is adding to the list...

I have a B2650 and I have 60” cutter and it works fun with my tractor. With the FEL on it is balanced and I never felt like I had a lack of power. The dealer recommended the 60” to me to cover the tractor wheel base.

Congrats on your new machine looks good. I am sure you will enjoy it! I look forward to comparing notes!

Flail mowers are pretty expensive in comparison to a rotary cutter, at least what I have seen at the dealers. I agree they will provide a better cut but you are paying for that quality. I bought a Landpride RCR1260 which handles tall grass and weeds well but is only up to 1” woody material...

Cleaned Most of the manure out of the coverall - still more to do but at least I can park on gravel now!

Here is a photo of it already dirty and working!:D

It arrived! I spent 6 hours on it today and used the FEL and the BH for most of it. The farmer that had the land I bought wasn’t a fan of cleaning out his stock shed. There is literally 3-4 feet of sh*t packed down in there:eek:. I think I m going to spend most of tomorrow clearing it. At...

The BH77 is 7.7ft deep max but that might do. Time is the difference between a big and small machine. I got my machine today and so far I have moved about two truck loads of dirt and sh*t. Took about 4-5 hours and that is me learning too. If you don’t need a mid PTO then the L series will...

ROPS - there is no relocate I looked through the manual today. Bungee cord works just fine - I even got an orange one to match :p

My dealer pointed that out to me when we did the walk around on my B2650, my plan short terms is a bungee cord around the top link and hooked on the bracket where the seat locks down. Later I plan to see the clearances and then use some straight rod to fab a hook that will remain attached to...

Even a little BX can handle a grapple, just depends on what you want to do with it. Figure out the tractor and then size the implements to it. I am getting my B2650 tomorrow and I ordered a EA wicked 55 grapple for mine. In terms of the tractor look at what implements you want to use to...

If it was just the tractor I would have too! Since I had the other implements it would have been a long process at about 10km per trip. I will suffer until tomorrow and hopefully they arrive first thing.

Dealer called me from the top of my road this afternoon, the county was doing work, regrading and filling in some washouts from a storm last night. Since they had the “big trailer” the county would not let them in until they were done. :mad: No tractor today :( Supposed to be first thing...

I am sitting at the table watching the driveway, already called the dealer to make sure it is coming too :D

We have 14 acres of old farm land. There is about 10 acres of overgrown pasture and the rest is forest. Lots of dead elm (Dutch elm disease) and some Ash too (most are showing signs of emerald ash borer). We will clean up the forest and get some firewood. Plant some new trees too and just...

I got a registration document with mine that included all the serials for the tractor and the implements I bought, I purchased in Ontario, but I think that is the loan registration. As long as there is a loan/lease on it, it is registered with a lean against it on a registry, at least in...