Search results

GS when you get it all plumbed up show some pictures of the PTO area coupling and the position the hydraulic tank mounts in please. This is a rare project that needs documented. Looks like there is plenty of room for this set up with the width of that front axle. :D

Hey mangled Mango :D show ole OB1 whats inby the clutch housing. Copy your WSM showing the Clutch disc please :)

Joe you have done some great research and testing with your IR lazer now read the manufacturer specifications and see if they list the maximum temperature for a Dryer's exhaust before components begin to deform. If you are 10 degree C under their rated temperature that will be your safety margin...

Here's a thought ... You should have the LA1002 FEL right? Chock the rear wheels, raise the front tires with the bucket ( do not get any part of your body under the wheels) with the all wheel drive level pulled in, slowly rotate the front tires both directions and see if the input shaft is...

Thanks Steve and Roy!!!!! lets have some fun with our toys :D

King :) add about 4 oz of Sta-bil to your diesel and then fill it to the top of the tank leaving the neck empty for expansion and venting during the temperature swings you will see up there on sunny winter days. ;) Very good idea to keep the battery from freezing but keep it in a vented area off...

John welcome and thanks for the kind words about our site which you are now part of.... here is what I've done in the past when the P/N on blades are not available. Go to this site for Oregon Cutting Systems techservices@oregonoep.com with your dimensions ( diagonal length tip to tip with center...

Welcome camer :) and I wish someone would come along with some good news on this problem but this same question has appeared several time up here before and there is no good news for a fix other than a new orbital steering valve. I wish I had a kit or some internal parts break down but I can't...

Guys listen... I want to add one more thought at this point in this post :eek: DO NOT ADD TRANSMISSION FLUID TO # 2 utra low sulfur DIESEL :mad: using the direct injection common rail CP3 Pumps. They will seize up from the additives found in Dextron lll and greater blends. Now your thinking here...

Compaction of the tire tracks will be minimal. After you get your tiller, and depending on the soil and which direction you break up the soil, your tire tracks won't matter, you'll see. :)

Just an opinion here :p but, I wouldn't want the maintenance of a 72 inch tiller's tines :( because you are going to hit rocks, hard chert type clays, etc. and until you have ever been walked right up out of your furrow its a surprise you won't forget. :eek: I'm not a 'real' farmer for a living...

As old as this Gray Market model is and no direct cross over to KAC model, if Vic can't find it, you would be better off taking your parts to a drive line fab shop and have them match up Dana Spicer yoke and U joints for your application, sincerely, Ole OB1...:)

I've been in service all my life and I've always said a good Salesman can sell a 'cold dog turd' to the right sucker and P. T Barnum said, "there's a Sucker born every minute". Go figure...:D:D:D

This is the best guess I can come up with and worth a try... Model Oil Filter Air Filter L4200DT/GST 70000-74035 Double Cleaner TA040-93230 O.F. TA 040-93220 I.F. Fuel Filter...

King I was hoping someone would answer you by now but here we go are you leaving your tractor outside and basically unprotected? :confused: Please tell me what your facilities are and we can come up with a plan taylored to your needs in Warren, Ohio. :cool:

Jeff welcome and play around with the site by doing a search on adding lights and several posts will come up with ideas. If you don't find what you need or still not sure Email ole OB1 for a schematic....:)

Welcome nk ...well that's not necessarily so and here's why. With the change of the US EPA requiring sulfur to drop to 15 ppm in July of 07 the red dyed off road diesel is exactly the same as the on road green dyed #2 Diesel. In MO you will need to add some type of CE additive and follow the...

Al...I was hoping to get to play around with this one. I work for a living with these electric over hydraulic valves and I was going to work some basic hydraulic equations for you that's why I ask for the cylinder size, etc... oh well :( come back with your new design, I'm getting ready to...

AL how about throwing up a schematic of how you got her plumbed up. Take some heat reading when fully loaded with an IR gun on the valve block and post them during duty on the drawing with cylinder dimensions...:)

Vic is their any study guide on the site on how to keep posts running smooth? When I saw that Kevin guy's post hit last night, I knew something bad happen because it took over every current posting almost instantaniously. I'm not a hacker so I don't know how they do it but we probably need to...