Search results

The glow plug light on my B7500 stays on as long as you hold the key to the glow plug position. Three seconds is usually enough during summer, five to six seconds in winter.

I have a 2003 B7500, which I believe is three models before your B7610. I have the RCK60-24B (60" cutting width) MMM. My RCK60-24B is definitely NOT a drive-over deck.

HiPowerOne - I agree with removing the seat from the slides. On my B7500, that requires removing 4 bolts. Once the seat is off, try checking if the slides are parallel to each other, and level to each other. Also, try loosening the slide bolts enough to move the slides slightly. My seat...

Cjp - OK, found the switch and the wiring. My wiring and connector look just like yours. The two-wire cable from the top of the switch goes straight up, does a 180 degree turn back down, and the connector snaps into mating connector above the cross channel that supports the front of the...

Cjp - The white wire from the front of the starter is not connected to anything on my B7500, as shown in the attached photo. I'm sorry, but I don't what your second photo shows. Is this a view from under the tractor? I don't know where the clutch safety switch is located, and my mmm is...

otteridiz - Can't help you with the price question, but I can speak to the the B75XX durability and ability. I have a B7500 that I bought new in June 2003. It came with a 60" MMM and the LA302 FEL. I use it on 12+ acres to mow, plow & blow snow, maintain tree lines, move & stack bulk...

I have a B2733A Male Quick Hitch and Subframe on my 2003 B7500. It attaches to the tractor as you described for your "other" B7510. My quick hitch is for a B2781B Snowblower (and other front attachments). I bought the Snowblower, Quick Hitch, Mid PTO Drive Kit and Half Driveline from my...

I have not been able to find javascript (disabled or enabled) on this pc. However, I just discovered that the "New Posts" and "Mark Forums Read", which appear in the top banner, work as intended. The lower "Mark Forums Read" and popup "Mark Forums Read" still do not mark anything as read...

I do get the pop-up "Mark forums read".

I am using Safari on Mac OS Big Sur version 11.0.1

New problem for me. I have lost the "mark all forums read" function. the buttons are still present and seem to "click" normally, but I always have 26 pages of unread posts. The problem began when I switched to a new MacBook, from a Windows 10 PC, which crashed. Same function on my other...

Bob F - I just sent you a new conversation (private message). Best wishes, Rusty46

mwzad - No, the Tach-N-Go does not attach to the tool (bucket, forks, etc,) in the same way that the universal skid steer attaches. The Tach-N-Go attaches to the three pin locations used for the BX-Series tools. So, your existing bucket will need to be modified to work with the Tach-N-Go, as...

mwzad - I have a 2003 B7500 with the LA302 loader. I have had the Tach-N-Go quick attach and pallet forks from WWW.MYTRACTORTOOLS.COM since this summer. I love my setup. I suggest that you contact Jere Dunn and discuss your needs. Jere is a great guy to work with. I don't know if he lists...

bpdaniels - I sent you a private message (conversation).

Correction from Original Poster: Pallet forks are 36" not 42".

The Tach-N-Go Quick Attach from WWW.MYTRACTORTOOLS.COM is now available for the Kubota B7500 tractor with LA302 front end loader. I have the first production model installed on my B7500, along with a set of 42” set of quick attach pallet forks, also from MYTRACTORTOOLS. My existing OEM...

Magicman - Thanks!!!

I have an issue. The NEW POSTS tab does not take me to ONLY posts that were added since I last requested that all posts be marked as read. Rather, I get a list of at least 31 pages of posts. Is there a setting that I need to change?

Bloomj - I sent you a pm (private message).