Search results

Try disconnecting and reconnecting the lines.

Set it up before the snow comes drive it around floating at different angles till you see what is going to work best and move the least amount of stone.

I don't know if you want to spend a little more than you will on a MX4800 but for about another 2k you can get a M5660SUDT it will lift about 1000lbs more on the 3 point and several hundred more on the loader plus it is heavier all around so it's going to do better in the fields then any of the...

Unless they were selling the Rural King / TYM Tractors for pennies on the dollar I wouldn't buy one I'd stick the JD - NH - or Kubota.

Just looks like they removed a label from that area it should clean off and shine up.

Your wire nut caps are awesome :)

The owners manual list 60" as the max blade width for your tractor.

Here is the one I used they sell between 35 & 45 on fleebay you just have to watch for them and they are great mounts. But any high weaver style mount should be fine. CLICK HERE

It'll keep you in your price range too

Skeets here is a picture of one I have with a 4~12x40mm Bushnell Trophy on it with my eye sight I need all the help I can get. It shoots great and makes a great ground hog rifle. :D Scope was on sale at Cabela's for $49.99 I used the Nikon 1 piece scope mount was 35 on fleebay.

Buying used is always a crap shoot sometimes you win sometimes you loose.

Happy New Year Everyone!!!

Like Bearbait said you're going to love it. :)

I agree with Kenny on this one - I'll try to get a picture on our MX5800 carrying a 2000 lb plus skid of wood bricks around. I sure it would handle 1200 lb bales no problem at all.

Sounds like you're all set - I have a 10' pusher but I'd love a blade I could angle.

I've been looking for a 10 footer to make up like you did yours that would make clearing a path out to the road a lot quicker then the one I'm using now but they go for a lot more money around here. I'm hoping to get lucky and snag one for a good price like you did some day.

WSM gives this as the result for that code "Crankshaft position sensor (NE sensor) abnormality"

I have a MX5800 too and can move and double stack 2000# skids of wood bricks and pellets but like mentioned above it's at it's limit doing so without a substantial amount of counter weight on the 3 point. The MX5800 is a great machine for mowing and pushing snow around but a little light to be...

If you have the two male quick connects like in Figure 5 just swap the Female connectors on them and you're all set.

We keep ours sprayed off I'm guessing that if we didn't they would eventually look like yours because they always loose some oil when you remove the hoses and some when the hoses are connected and in use.