Search results

I have a 2610 with a kubota 3rd function. There is an on/off button on the outside of the stick a little lower down. And the operator buttons are on the inside of the stick. I can post pics later. But I’m curious of your setup. Can you post pics?

Same here. I lite the glow plugs for 1-2 seconds and she usually fires up on the first compression stroke

Ahh. But I also have air conditioning!!! Which is good because with all that glass it a big oven in there, even when is nice out. If the sun is out, it gets hot!!

I’ve been meaning to order an extension. Soon the cab can only come with standard tires, so I was told

You could have burned out the glow plugs. I believe even the manual says to heat them for 3 seconds if the temp is above freezing, and 5 seconds if it’s below freezing

Only time I’ve seen damage is when the ground is soaking wet.

They wouldn’t change my opinion of the tires. They seem to have great traction in muddy and messy ground. I don’t think they would have a problem pulling a plow. I’ve pulled my 60” box blade with all of the ripper shanks lowered and the tires didn’t lose traction at all. Even though you won’t...

I have an LX2610 with R14 tires. I have done about 40 tons of gravel, used it on multiple properties for 30” of snowfall, and also box blading some very muddy and messy ground. And I’ve driven over grass and haven’t torn up the turf They have performed great in every scenario I’ve had them in...

However, since the circuit cuts out, you can’t get much of a measurement. the first time I came across this, I spent hours testing everything, even the ignition switch, grounds, voltage drops, etc. Then I jumped the negative directly to the starter and BANG, started right up. another time I...

How about this... Get a jumper cable and hook it to the negative battery terminal. Take the other end and use it to ground the starter. If it starts, you have a bad ground. Then you can remove and clean all the connections. And/or add another jumper wire from the battery to the starter. I’ve...

Nope. I ordered it through Everything Attachments. It’s a Digga DDD. 5-12 gpm flow I got the 9” rock auger too. I’m not sure what I will be digging In, I have lots and lots is holes to drill.

You guys are making me glad I got a post hole digger that works off of my front end loaded and 3rd function valve!!!

Here is a pic of the extension. It sets the mounting pins about 10” further back. I have an LX2610 Not sure if you need the extensions if you don’t have a cab.

That’s what she said!!!!

I thought the same thing. Mechanical means no hydraulic. Originally I thought I could install it but after looking at all the parts, hoses, etc. I decided to let the dealer install it. If it’s still under warranty, and it should be, I would contact the dealer. It’s my understanding that the...

I have an lx2610 with a self leveling kit. It is both mechanical and hydraulic.

I have a lx2610 cab. No lurching what so ever. It’s a great little tractor. If I had to do it again, I would definitely buy the same one

I never had a 2650. I was speaking in general terms. It’s my understanding the 2650 is being replaced by the LX2610. It seems to reason things such as zirk locations are a little different But I love the 2610. It’s a great workhorse. Comfortable, controles are responsive, easy to use

That was me. But I have an lx2610. Even though it’s replacing the 2650, it might be slightly different