Search results

It's almost like they are doing it to spark controversy!

I was trying to determine if there was any torque on the motor section when the pin was removed

You could if you also purchased all the mount fixtures that are used to attach the BH to the tractor. It would be a fortune to get them from Kubota!

Any lights on or codes coming up on the panel? Sounds like it is going into limp mode.

Just for interest sake how level was the tractor when you first removed that pin and was the main transmission in gear or not?

It is not directly spring loaded but the pistons are. Depending what residual oil pressure would be in there and what it would take to balance the springs on the pistons, that plate could rotate when the pin was removed. I honestly can't think of any other thing that would make your tractor...

Here is a wiring diagram.

You might be able to turn that plate to the correct position by putting the tractor in high gear and carefully pushing it to turn the assembly. I'm not sure this will work but it certainly is worth a try!

Looks to me like someone else removed the wrong plug and allowed the motor reaction plate to turn.

The red wire in the picture of the starter is probably a fusible link. the picture doesn't include enough to see the other end of the wire.

It is a fusible link. It looks like a length of wire but is designed to burn out if overloaded. I usually replace them with a circuit breaker.

I was able to shrink the file online from it's original size of 4 megs down to less than 1 meg for posting

If the motor reaction plate turned 180 degrees the tractor would operate in reverse. It is so long ago I had one of those apart I can't remember if there is a hole opposite that you could put that pin into!

There is also the issue that the BX1880 has smaller wheels so is lower and it is a few inches shorter so you need the shorter front bracket ( or modify the one that comes with the deck) Otherwise the RCK60b23x will fit on the tractor. You need to lift the tractor a small amount to push it...

Spend the $1100 and have a good mower for another 20 years or buy a cheap riding mower every 3 or 4 years, Your choice.

The original inner boot (k125301660) is no longer available from Kubota, It changes up to a complete tie-rod end assembly for quite a bit more money if all you really need is the boot!

Has anyone here installed these boots on their BX and if so what is the verdict...

Torques for the loader bolts from the assembly manual. Here is the assembly manual.

Ask your dealer for the assembly manuals that came with your tractor and components. It includes a lot of good information that you likely will find useful. I always included them in the package we gave the owner when we did the customer orientation but I understand that many dealers don't. It...