Search results

I used my 5200 with the bottom plow to change the tires on my VW. Wasn't fast but worked in a pinch.

Flex seal for the win! Kidding unless it really works.

Hurts nothing to post what you did. Some of us might get something useful out of the info.

Well done, just post some pictures of your tractor anyway. 3700 is great.

I have three old pieces of David Bradley implements. Disc harrow, adjustable foot plow, and lay over plow. Do these have any collectable value, yard art, or should I go ahead and clean them up and modify them for a sleeve hitch?

If your pickup fuel pump is running you can hear the return fuel with the fuel cap off. Listen carefully for the return gurgling. No gurgling or ticking/clicking from the he fuel pump you need to troubleshoot there as well. It could also be a very clogged filter or a fuel line can be pinched...

When you replaced the fluids and filter did you raise the rear end and let it "slowly" rotate forward and reverse to get the air out of filter and pump? Ot can be time consuming on this model to get it right. The pump is mounted high and on the front of the rear axle direct driven from the...

Ha ha

I think she hates that tractor.

Good catch with all those parts. I do believe I tried to buy this same tractor but you beat me by a few hours according to the owner. Good deal.

I still want to see pictures of this Cub deck install. Some point ima going to run out of deck to patch up. You should post pics, part#s for the blades and belt so I can add to my files. Thanks in advance

Funny you said get stuck. I did get stuck yesterday when I had large tree root get between my front tire and anti scalp wheel of my deck. So far that's been the only time. I'm filling in a low spot with yard debris and that root was at the top of a low spot I'm filling. Marked it and moved on.

Built an chain box tonight to help the weight of the front end. I'll try it tomorrow to see how much more ballast I need to add. Yes, it's an old ammo can.

Found a picture of your tractor when the parts were a little more assembled.

What model was the Cub? I'm trying to visualize how that went together.

Bits and pieces and a lot of geometry. It works. Now to clean up the rest of it and paint the blade orange. Next I'm going to find all the same parts again and make a sleeve hitch for the rear. Funnest part of this is trying to build and re-engineer something so I can remove and install it as...

Took me long enough to start this project but now it's about finished. The goal was to make all the Craftsman parts work with as little as possible modifications to those parts while keeping the deck on too. Just use the same geometry and install in different positions. Works great so far now i...

What he said up there. Yokes, pump, or fluid. "If its' the trans end yoke, pray to the Kubota Gods that it didn't hurt the trans splines"

Looks like you don't have the flexible disk on your drive shaft after all. More like my T1600. Could be the splines wore out on your front yoke or the key at your hydro is bad. If you rear universal goes out it can take out the pump. We're there any other abnormal sounds from the pump? Check...

If its like my G5200 the flex disk on the drive (if it has one) could have broken. That makes a BIG rattle though. Check the hst fluid too.