Search results

I thought I attached the hitch dimensions , guess not . How does yer hitch & attachment measure up to this drawing . Dimensions for hitch & attachment . How far is each off ? animals45

How does it compare to that dimensions I posted earlier in this thread ? animals45

What other attachments did the tractor come with ? Maybe those 2 rods are for another attachment ?Yea pretty sure the spring goes through the hole in the top of that that aluminum part with the 2 teeth . Once that spring in in that hole ya may fine that ya have one less rattle . animals45

I got my bushings at Tractor supply . But my QH was the proper width spacing for my Cat 1 Implement's so all I had to do was to bush the pins to a larger diameter . Is yer QH a real Cat 1 QH ? animals45

I learned with mine that there is a learning curve . I bought a used HF QH for 40-45 bucks , a few cat 1 to 2 bushings & new top hook . I think total i'm in for 65 bucks . yea it took a couple times figuring out the quirks . With 4 failed back surgeries & pinched nerves in my lower back this...

Looks like if he pulls the bolt & moves it tp the upper hole there may not be anything for the 2 support arms that are bolted to the lover hole ? animals45

Orange backhoes are a premium unit these days . I have a bud that has been waitin for 3 months for his to show up . If ya want a quick list of tractor attachments head over to tractordata.com & pick Kubota & then yer mdl # . animals45

Dimensions are on the Amazon page . animals45

Ya may must have to suck it up & buy another hook . I bought that hook from Amazon & never looked back . animals45

Use the lower pin . animal

Does yer blade have a kickstand ? My LP does & it's at a terrible angle for my QH . It's gonna take a few times till ya get the right recipe . Ya may also find what works for one implement may not work for another one . animal

I bet the holes are in different locations . This hook looks just like the one I took off until ya look at the holes . animal

This is the top hook I got to make my LP back blade work with my HF QH https://www.amazon.com/gp/product/B08W4X6TJT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 animals45

Ya can get a 30 " drawbar at places like Tractor Supply . They have holes ya can bolt it on to , or weld it on . I'm sure others have other ideas . animals45

I know ya can get Cat 1 & 2 drawbars at Tractor Supply & like places . Maybe ya can somehow mount the unit to a wider drawbar ? animals45

Here's what ya need animals45

Don't forget that you may need wheel spacers to allow for tire chains . You need to figure that out before you agree on what the width of your blowers will be . animals45

Thats a real good eye there Ken ! While I can't be of much help here . I have to comment on the Op's comment about having a good parts guy . Back in the olden days late 60's & 70's it was so common to have a real good parts guy . I wish I could say the same for these days . The counter guy that...

There is some adjustment left in that pic , but not enough . Whats the front look like ? animal

Does the part with the round hole in the middle of the pic go on that shaft to the right of it ? animals45