Search results

How bout a pic of where the joystick leaks ? SO when ya go to use the hoe & ya put the stabilizers down , do the legs start to retract without using the control ? animal Have you replaced or moved any or the hoses recently . When did this start . Did it start all of a sudden or did you do some...

Isn't this for a tractor ? I have several tractors which have the buckets down to bare metal & they have been like that for 30-40 years , I don't see any rust on them . animals45

Years back my I had a bud that ran a excavator business &. he made this plate where he removed his 2 outside teeth from the shank & & slid this plate that had 2 old teeth welded in the 2 outside locations with some pipe also welded to it that wen t around the left over teeth so in just a few...

https://toolsjoint.com/hex-bolt-vs-carriage-bolt/ animal

Till the second or third time ya go to bolt it on & can't find a carriage bolt & a plain bolt get's shoved in . I'm a fan of standard hardware . I bet if ya looked at bolt specs a regular bolt has more strength than a carriage bolt animals45

Maybe get 2 longer bolts &. 2 lock nuts ? If your concerned about the gap between the mount & the bucket put the washer between the 2 . animals45

SO my machine is 55 inches wide & I use a 72" blade no problem , yers is 43 so I would think ya could get by with a 60" one , hopefully someone that has yer tractor will chime in . Make sure that what ever ya get ya can move the blade by unbolting it from the frame & sliding it left or right ...

Mine is a Lp 72" . animal

I probably use my back blade way more than I use my box scraper , Unless I need the rippers my back blade is on the tractor , Thats on a L3301hst . The option to be able to move the blade side to side in it's mount is great for cutting ditches on my dirt road & also for grading wider than the...

Good deal , thanks animals45

Not sure if this post belongs here or the fab forum . I have. 3301HST with a LA525 loader which has a SSQA bucket @ 65" wide . I have a bunch of new bucket teeth & shanks left over from when I was going to re-tooth one of the buckets on my Case 580 . SO I want to make a tooth bar for the loader...

Not trying to repeat stuff . If it weren't for the rippers I'm not sure how much I would use my box scraper . I'm a big fan of the rear blade . You can unbolt the blade & slide it to the right or left so when your cutting a ditch on the side of the road your not driving in the ditch your trying...

I have a HF QH that I bought used . I bought the hook for the top of the hitch from Amazon https://www.amazon.com/gp/product/B08W4X6TJT/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 & bought some cat 2 to cat 1 bushings at Tractor supply for under 10 bucks...

Thanks , nice unit . animal

What kinda of GPM is that motor lookin for ? animal

I looked on Amazon & they had a ton of listings . That mite be something you can get with free freight & even luck out & get a extended warranty for real cheap . If I spend more that's 100 - 150 on the big A I usually pay the extra for their warranty . When I got the LED hi=bay lites for my shop...

I love those totes . I have 3 of them sitting here full of water for fire just in case . I bought one of those Harbor Freight 1" gas powered pumps that I have strapped to a old snowmobile trailer along with a full tote . Mini fire truck plus I can take it any where i'm working on our road for...

They make forks that mount on your 3 pt . Those totes are cheap enough that you could have one setup for drip that you swap out when the 1st tote is empty . Those 3 pt tanks that you can get from places like Northern are up on the pricy side . Totes 35-50 bucks on Craigslist . animal

If you don't want to return it find a welder & turn it into one for a 3pt & add some weight to it . animal

If those were on a tractor you can defiantly see why kidney belts were invented . animal