Search results

I have 1700hrs on my ZD323 and mow several acres per week. My mower has been super reliable. Besides routine maintenance, I have replaced deck spindles, replaced deck gear drive (1500 hrs) replaced battery and recently replaced dynamo (Kubota term) also on my second set off rear tires and 3rd...

Nice cutter. A couple of things I can add. The splines that you applied never seize call for grease (I use Red Armour). On the cutter head is a plug that you remove and also add the Red Armor grease. Owners manual on my Shindawai 282T did not address adding the grease, might be a dealer...

I suggest making sure you are getting the correct amount of torque on the bolts and that the blades being used are the proper thickness. I had problems with blades loosening when I didn't catch that the Oregon Gator G-5 blades were thinner than the the O.E.M. blades.

FWIW, I added this filter in my return line after flushing the power steering. It is easy to remove and clean. NAPA

The air seat is a $1000 option. The box blade and rotary cutter costs help sweeten the deal. I believe the L4060 is a little bigger frame size. I would try to buy the L4060.

Another canopy source. Canopy

This is the canopy installed on my tractor. I used the on line tractor configuration at the Kubota site. Canopy

On my 4760 I have rear tires loaded and 200lbs of weights per tire the rear of the tractor still lifts depending on what material I am loading in the bucket. When I add my 1k lb ballast box, I get full use of the lift capacity of the loader regardless of the material I am loading in the bucket.

This will give you an idea of what is out there for 1100 series machines. I believe they only sell through Kubota dealers. Orange Aftermarket.

Utube costs me far more than what I can save. Those project farm reviews always get me to buy stuff I didn't know I needed. :)

I found another video that goes over flushing power steering and power boost system. This might provide a better process for getting the job done. 7.3l Steering flush.

I would flush and refill power steering/hydro boost system with schaeffer's all trans supreme. power steering/hydroboost flush

We tried to figure out a safe way to lift our RTV 1100c on a two post lift and have been unsuccessful. This product can make the lift usable. Local Kubota dealer has a couple lifts like this. Turf Rail

A family member just paid $800 for 50 hr service on RTV 1100c. $600 of that was labor.

I have 1500hrs on my ZD323 and on brake switch #4. Try holding key in start position and kick down on brake pedal a few times. When mine starts to stick I hose it down with contact cleaner and blow it off with compressed air. It buys me time until I replace the switch.

FWIW, I had problems with camera lens and screen protection cracking. Turns out my Otterbox case was the problem. I shifted to a Spigen case and use Spigen lens and screen protectors. The Spigen case is designed for use with the protectors, Otterbox was not.

Not sure if it is the best tie down method but this works for me. My equipment trailers have Rails. I place my 1140c in 4WD and pull up on trailer until front tires contact the trailer front rail. I run a heavy ratchet strap 1700lb working load through the cab leading forward to my tie down...

If you go to the DR website you can read about the founder of DR. Turns out the guy developed Troy Built and sold it many years later. After his no compete clause timed out he started DR. I also have a DR tiller. Sadly, I found a made in China sticker on the tiller.

I have a Long grapple and have been very pleased with construction quality, weight and durability. W.R. Long