Belleville washers

[skeets]

Anybody have the part number for the Belleville washer that go on the mower deck for the blades, there are 2 per spindle and the blades keep coming lose so I thought maybe replacing them might help. Anybody ?

 

[GreensvilleJay]

surely they're listed in the parts drawing online ? Though you'll need the deck ID....

 

[85Hokie]

Anybody have the part number for the Belleville washer that go on the mower deck for the blades, there are 2 per spindle and the blades keep coming lose so I thought maybe replacing them might help. Anybody ?

Not sure - but this might be your number:

K5651-34350 (new number K5651-34352)

https://www.messicks.com/parts/kubota/K5651-34352

check your deck when you go to Messicks

 

[CGMKCM]

I suggest making sure you are getting the correct amount of torque on the bolts and that the blades being used are the proper thickness. I had problems with blades loosening when I didn't catch that the Oregon Gator G-5 blades were thinner than the the O.E.M. blades.

 

[skeets]

Big K blades so they should be good

 

[TECH101]

Anybody have the part number for the Belleville washer that go on the mower deck for the blades, there are 2 per spindle and the blades keep coming lose so I thought maybe replacing them might help. Anybody ?

 

[whitetiger]

Perhaps since there are multiple part numbers for the Belville washers depending on the deck, we should find out what model number the deck is before we guess which washers it takes.