Search results

  1. C

    Is it time to let go?

    Time and money analysis usually says replace equipment at 10 year mark, after that it’s diminishing returns
  2. C

    L4701 or MX5200 - Stuck on Decision

    Easy choice, the MX. no advantage to the orphan model L4701
  3. C

    Slide On fork receiver hitch problem

    This is a good point since too light tongue weight can lift the tractor rear tires off the ground or even flip the tractor over if the towing center is above the level of the draw bar or pto. Once the trailer is hooked up and lifted we run a chain over the hitch and hooked with a sliphook to a...
  4. C

    Bent mower deck

    That can be bent back with a Stilton wrench. I’ve seen people cut the bent skids on a bush hog back to get clearance with a grinder or sawzall but they are a lot thicker than that lip and too thick to bend back
  5. C

    Better for gravel driveway maintenance, a Box Blade or Landscape Rake?

    Land plane is perfect for gravel roads
  6. C

    Land Pride Vs Artillian pallet forks

    Get the Land Pride forks. You might consider getting the 48" forks, they are more useful than the shorter ones. No need to be locked into the Artillian system. If you get a grapple its not going to be their version because there are much better ones available I do recommend going with an...
  7. C

    Thinking about selling the l3301

    Ask $24000 take less
  8. C

    MX5200 HST recall

    for an L4701, you have to send your transmission serial number, Other models the tractor serial number
  9. C

    MX5200 HST recall

    Our 2019 delivered MX5800 just missed it (SN 55184); MX5800 affected units are SN 55887-56223. Yo can call Kubota with your model number and serial number and they can tell you if its affected; 888-458-2682
  10. C

    MX5200 HST recall

    Here is a pic of the repair on a GL. Parts needed are 2 gaskets, sounds like the MX gaskets are available, the GL ones on back order. One poster said if the bolt loosens the HST will act like in neutral, so it may not be catastrophic failure issue
  11. C

    MX5200 HST recall

    Can someone post the PSB number, models and serial number ranges of the affected units?
  12. C

    MX5200 HST recall

    Our dealer said he had sold 12 affected units, so I am hoping our July 2019 delivered unit is not affected. The US HQ is just 50 miles from us so it seems like we would get the letter pretty quickly if it is coming to us
  13. C

    MX5200 HST recall

    Our dealer says there is a stop sale on all L and MX series tractors due to possible loose bolt inside the HST requiring a tractor split to check/fix. Our L3901 is older but our MX5800 May be affected
  14. C

    Front Axel Oil Change on HST

    It’s “axle”, it is separate from the HST system. We use gear oil but you can also use hydraulic fluid
  15. C

    Replaced factory tool box

    I agree, too hard to find things in an ammo can
  16. C

    MX5200 HST recall

    MX4800, MX5200, L6060, maybe others
  17. C

    BX2370 Coolant is below L - can I top it off with generic green pre-diluted 50/50

    Green 50/50 is fine to use. Don’t waste money on extended life
  18. C

    Kubota 2019 MX tractors- HST bolt issue recall

    I’m seeing FB posts from people who got letters from Kubota about a possible loose bolt in the HST for 2019 delivered MX models. Ours is a 2019 delivery date MX5800. I don’t see anything on the Kubota website about it. Anyone else heard of this?
  19. C

    MX5800 water pipe info

    The rubber hose got punctured towards the ERG end (slow leak, not repairable) so both of the metal pipe ends are fine, it got cut by a pointed cutoff sapling while clearing some brush. Fortunately all of our tree thinning and cleanup is now finished on both farms so we can focus on things that...
  20. C

    MX5800 water pipe info

    Fantastic, thank you!
Top Bottom