Search results

He hasn't even done the 50 hour service at 70 hours. I'm not sure I'd want to void my warranty like that.

Intermittent electrical problems are the hardest to diagnose. If it has a computer the best place to start is to clean all the bulkhead connections at the module. If there's no computer start with the ignition switch connections.

Any chance the added weights on the front added to the failure?

Mine has tubes with zerk fittings on a manifold that run to the spindle bearings so they can be easily greased without removing the belt covers.

Thank you Dan!

Dan, do you have a diagram for installing rear remotes on an L2501 with Kubota loader valve + LP 3rd function using the Summit P40 Valve? Would it be basically the same as the above diagram with port "N" plugged?

Anyone know where to get replacement bearing grease tubes for a Del Morino Finish mower? Every place I've checked is out of stock.

Nice! Now I want one for my L2501. Whats something like that run including rear remotes? I already have a LP 3rd function for a grapple installed.

Sounds like a job for Peanut!

As mentioned, a Heli coil would be best for someone who is experienced with installing them, and at the risk of having to break out my pecker to measure it, I'd suggest an over size self taping drain plug for someone who doesn't have experience installing Heli coils.

He's gone Rogue and is opening his own implement business...........

Glad to see this thread getting back on track.

Often times when you go too far out on a limb to expand the limb winds up breaking. I feel for all those who are going to be on the losing end having put down their hard earned funds for equipment that will never be delivered and the employees who lost their jobs. It sounds like Ted covered...

I haven't read all the posts but just in case this hasn't been shared it's from 3 days ago. https://hickoryrecord.com/news/local/business/everything-attachments-conover/article_c656dd04-c460-11ee-b468-33e5a8de23bc.html

It could also be the ring groove on the piston not being machined correctly.

I don't have a better explanation but I basically got the same story from my salesman at the dealer shortly after I purchased my tractor.

I ordered the 24" x 36" perforated sheeting from onlinemetals.com https://www.onlinemetals.com/en/buy/carbon-steel/0-06-thick-x-0-5-hole-x-0-6875-stagger-carbon-steel-perforated-sheet-a36-round-hole/pid/13510 I clamped it down, bent it by hand, and tacked it in place.

Thanks! A lot of thought and effort went into making it but it turned out well. No damage to my grill after a year extensive grapple work. Some more in the fabrication process:

The first thing I did when I got my L2501 was fab a grill guard. A quick wash before painting........... And Bob's yer uncle...........