Search results

Holy smokes I didn't realize I got all these replies already! Couple of answers to various questions from above: -The blades are not upside down and I'm fairly sure i got all the washers back on. -I have been running the tractor at full throttle when mowing. The bx2200 doesn't have an RPM gauge...

Yeah I replaced the ones on the front because I unknowingly got spot led lights instead of flood. I got the bar because it has spots in the middle and then floods on each side and it really helped illuminate anything in front of me. The 2 spots just didn't cut it, but mine were only small 18w...

The marks seem to be a couple inches shorter than the blade. I have not pulled the deck to inspect the blades yet as it seemed like it wasn't just one blade doing it. It appeared to me that either outside blade was doing it almost offset as i went if that makes sense. So the deck is set to 3.5...

I'm not sure on the amp draw. The "large" bar on mine was rated at 72w and the small ones on the back were rated at 18w each. I also replaced all the other standard bulbs with led equivalents to hopefully lessen the load as well some. So far with everything running I've had no issues but i...

Could this be the steering cylinder going bad? I just had to replace mine this spring on my bx2200 and it's super tight now. Last fall I could be mowing or spraying and go to turn and the thing wouldn't respond for a full turn. I ended up ordering a new cylinder and replaced it myself. Wish I...

Only took 2 years but finally updated the photos ha ha. I updated the setup to a larger LED bank on the front and a blinking amber light on top, as my property is near a blindspot near the road, to help cars see me at dusk/night.

Long time lurker, first time poster so hopefully the pictures attach. I am having some issues with getting a lot of circles in the yard and it almost seems like the deck has to much play and as the tractor hits ruts the deck burns in on the far left blade and then the far right as it sways if...

So it's been awhile since i've had the LED lights on my rops but I figured I'd post up some pictures since others on this site were very helpful in getting this done. I'm by no means a fabricator so I sourced the parts to go around the rops from menards in the hardware section. I also bought a...

Here are some of the pics from the dealer of the new bx2200. It was in immaculate condition for being almost 16 years old. Got a new seat on the way, should be here tomorrow for a little more comfort than the original one provides.

Hey guys, I'm a long time kubota user, now first time buyer. My dad had a bx2200 that I used to mow with at their shop years ago. My wife and I are building this summer on a 3.5 acre plot and I needed something with more oomph than my 42in simplicity and with a somewhat limited budget I sprang...